RC10GT/NTC3 fuel tanks gone forever!..only a dude in Australia have any left on Ebay, big money with shipping.
A year ago u could get them from Amain for $12.99.
bummer too...had to go with a Traxxas tank for my boat project
Last post
I may have one you can have. Wouldn't be new of course. I'll have to dig around. If I can find it I'll bring it down.
The seller shipped it today, I should get it in a few days. I'm not anywhere near knowledgeable enough to be able to identify it accurately from the pics, but it's a black tub chassis, with upgraded arms but includes the original white arms. From...
Last post
Looks like you have a mid run thick arm team truck with universals. Also some upgraded RCPS turnbuckles on there.
Starting with a low mileage put away wet black parts GT and a very clean Holeshot chassis, thanks Phin. Not going to get too crazy. Just going to put some hop-ups I already have into the build as I clean and freshen up the parts as they get swapped...
Last post
Shaved the rear tower so the body could sit down just a hair in the rear. Had to lean the top of the front shocks in. But it fits well enough for a shelf queen. I know I’m not supposed to like the modern stuff. But I do like the low slung stealth...
I'm just waiting on some parts to arrive to finish this one but it will be a runner for sure. It's made up of many left over parts and will have a vintage look. It will be powered by a crazy .12 that is overkill, but should sound like an angry...
Last post
Ummmm, I can hardly remember what I've done 2 days ago let alone 4 years :lol:
I have built mostly buggies. Recently i finished building rc10gt electric conv and rc10 t. I have heard of the axles breaking whether dogbone or cvd. I am trying to find out if there are any other options without doing some extreme overhaul . Thank...
Last post
I wouldn't worry about broken shafts, while it does happen it's not common.
Make sure your slipper is set up so it slips before any damage is done.
I had some old rc10gt and some NIB parts and am building a race worthy GT “factory team”
My local track is going to run gas truck class.
Going to run a new OS CZZ engine with MIP 4in1 clutch, associated tuned pipe, Robinson metal diff gear, V2...
Last post
Loving the build so far. Going to be pretty dang cool when its running. I've got several of mine finished and just built my brand new gt2 Factory Team as well. Didn't do a full restoration on my racers so I built my other new ones instead. Shelf...
Came across this truck for $40.00 as is and couldn't pass it up. The guy I got it from said it had been sitting for a few years in his garage but it was a strong runner. It is pretty dirty and will need a full break down and rebuild. My son got the...
Last post
You can replace the pull start with a Sullivan Tiger Drive. I have one on one of my GT's and it works great. S702 Drive and a S698 Shim Kit as needed.
Thanks for the info. I think I will order those parts to have around even if I do get the...
Need a little help with a body ID. Kinda looks like an RC10GT body......but I don't know for sure. My bet is associated, but 100% sure. Thanks for the help.
So I have a proline truck conversion that I’ve mounted onto an Andy’s trailing arm car and need to find a nice factory looking way of mounting the body
As most of you will know most of the conversions use a front body mount that attaches via the...
Last post
I started to forget things when I turned 50 years old. Now I am 61 and starting to drive around with my blinker on. :?
:lol: :lol: :lol: couldn't help it...just did this the other day after someone driving in my blindspot kept me from getting a...
Here is my original RC10T purchased when they were first released. Its been hanging on the wall in the garage for years waiting for a restoration. Only two things I had to replace were a rear limkage and body mount. Don't tell anyone but the rear...
Last post
That looks clean Doug- I really need to snag me an old 10T.
There must be a way to Convert RC10T to take Hex Wheel & Tires.
Does anyone have any information on that.
Thanks in advance.
Last post
Here is a pic of my RC10T using the B4.2/SC10 front setup and Associated rear hexs #9892. If you have 1/4 axles with dog bones you can get #9670 axle stubs from amain along with bearings, shims CSW7048, pins CSW7204, red orings 5407. I used...
So I came upon a great deal on a RC10GT, which in was planning on cleaning, getting running, and selling. After long and deliberate consideration (about 15 minutes after I got home with it), I decided to keep it. Seeing as how there's really nowhere...
Last post
That is looking super clean.
Thank you! My first order of stuff should be showing up tomorrow, so I'll be able to make some progress soon.
nice job on the engine turning.....
Thanks! It's not a hard process, but its tedious. I don't think...
On the nitro versions of trucks,
I cant claim to have the mental dexterity to keep each model clear in my head but im guessing you cats savvy to them will know what im babbling about, and set me straight.
Ill grab pictures of the blue when im out...
Last post
Hacked or well engineered is a bit of perception, in a way,
Some purists would say that anything at all not stock is a hack that ruined the car, my flares or 454 do not in my opinion ruin my 69,
Im an old school gear head, before ratrod started to...
So while digging through some of the bodies I have I came across this. It's a Dean's body for the Associated RC10GT, which normally is nothing all that special but on the tag is a stamp that says it's a pre-production sample . Do these normally get...
I picked up two RC10T Team Trucks last year and used all of the best parts from them.
Did the hydrogen peroxide treatment on the white plastics.
One truck came with a new, unpainted body :P
This is the first body I've airbrushed.
No mods, just...
I have been racing them for about 20 years but I am new to restoring RC Cars! This is going to be my first crack at this and rightfully so, I chose the first race kit I ever built. The RC10T.
I originally learned of...
Last post
Those white parts will come up great with hydrogen peroxide.
I use Duplicolor satin black on AE chassis, it looks so close to anodizing.
I wanted a 10T so bad, when I was a kid!
Just as well I finally have one. :D
Good morning all,
I am far from any expert on RC cars. I purchased this about a decade or so ago and i ran it a good bit. It sat for several years, the other day i got it back out and its got issues. 1. Battery chargers, steering works...
Last post
I plug the ESC into channel 1 and ESC just beeps and the car rocks back and forth but no steering and no throttle response. I plug ESC into channel 2 and ESC does not beep but I still get no throttle or steering response.
Was wondering if anyone has run DuraTrax Sixpack MT 2.8 Mounted Truck Tires 2WD C2 on a RC10T4?
My questions, if so:
do I get the 2.8 or the 2.2 and I heard you should have a half inch offset on these, so does that mean a half inch offset on the...
Last post
Howdy advintage!
I run the Six-Pack 2.8 ST (Stadium Truck) wheels/tires on several models, I like them very much for general bashing.
The closest thing I have to your question about a T4, is an RC10 T5M - I use the 12mm hex, 1/2 offset Duratrax...
I'm looking to restore an old RC10GT and looking for help identifying which model it is. It's a blue chassis model with blue metal nose brace rods, black topped fuel tank. The front shock tower has RC10GT stamped on it and I can't find...
Here’s a cool kit that I got from Factory Works. Special thanks to Jeff for making it in red for me.
27E9FDA4-D3FB-4143-A7F9-F5BB78F6553C.jpeg
28B80CFC-0A32-4207-96AF-CA68C31C299F.jpeg
39E661CC-CD52-42CB-8BFB-DC27252E40A5.jpeg...
Today I pulled out my T2 that I bought in '96 after working and saving a long time as a teen. And that is my one and all jewel RC car. It hasn't been run a lot. The last time was in 2009. Since then it has a kind of shelf queen status.
Out of...
Last post
I am too trying to sort thing out regarding wheels, I ordered a front hex conversion from Custom Works, if that fits, I can just use the new hex wheels, the rear, I’m not sure if you can just slap on a 12mm hex and run the modern wheels, or if you...
My son and I needed something to spend some time on so we thought we would build an RC10T from all the best parts in my parts bin.
So far we have found a pretty decent set of white parts, which have all been given a good scrub with Simple Green....
Last post
What medium did you blast the outdrives with?
We used the aluminum oxide media that came with our Chinese knock-off of the Paasche Air Eraser. The real stuff is the Paasche AEX-6 aluminum oxide – fast cutting compound.
After being away from RC for about 25yrs, I am returning to the addiction :twisted: I recently purchased a RC10GT that I have always wanted as a kid, but could never afford one. I have no experience with nitro, but I am fairly up to...
Last post
Here are the updated electronics I have on the truck:
(2) Savox 1257 servos
Protek Life receiver pack
Sanwa receiver w/ MT-4S remote control
I've ran about 8 tanks through her and she has performed well. Took some time to learn how to tune...
I have a 10T back from 1994. It's sat on the shelf for a while and then my daughter got interested in cars and thought this would be a great teacher car.
I do a simple warm up with the truck (nothing aggressive) and I broke a rear dogbone (it's...
Last post
Ebay is pretty much the only place to look for replacement parts. MIP CVD's are the best upgrade, but they go for a high price on ebay. Around $100 from what I have seen lately for a complete kit. Might get lucky and piece a set together for half...
Does anyone have a template for the top deck / plate on the duratrax nitro rc10 kit ?
My truck has a piece of sheet metal that's been cut out and doesn't look pretty.
Also on these conversions, was everyone running stock rc10 T bodies ?...
Last post
Someone might have to confirm this is for a 10T and not an LXT because I can’t remember if they are different. If it’s what you need I can take it to work and copy it with a ruler next to it and you can scale it as needed. I don’t have a scanner or...
Well SC10 and B4.2 front hex stuff is just as rare and expensive today as anything. What are options for available wheels these days. Seems various front stock (7842) is out there for non nex conversion but nothing really available for rear.
1/4...
Last post
Well SC10 and B4.2 front hex stuff is just as rare and expensive today as anything. What are options for available wheels these days. Seems various front stock (7842) is out there for non nex conversion but nothing really available for rear.
Hi all. This is my original RC10T that I saved up for, and bought new when I was 12 years old. It was my first real RC vehicle. It is in relatively good shape, and has not been run since probably 1996. As a kid I...
Last post
That servo mount method is brilliant! Thanks for sharing that pic/thread!
I may have access to one of these that is in really good condition but I doubt the engine is usable. It seems that this chassis shape would hinder an E-conversion. But I also have a spare RC10 original buggy chassis. Does it make sense to combine...
Last post
this is my solution to e-gt and flex in the chassis. no new holes, the lower part of the waterfall picks up the motor mount holes.
As some of you already know, I’ve own many many Team Associated Buggies and Trucks, and although, I owned a B2 converted into a T3, I’ve never owned an actual T3, until now....
Seeing that Jconcepts re-released the T3 body, I desperately needed a...
This is Adam's other rig that dominated the vonats, and is still in use. his t2 is close to stock just like his b2 buggy. very little done, kept simple, and used minimal modifications to make the truck drivable and durable as possible. great tips if...
Last post
I know it’s been a while but do we have any updates on his T3 build?
i replied to mike's question with the answer. adam is still working on it, and the b3 too.
local hobby shop called me up a few weeks ago and said get up here we have some old rc trucks for you
showed up and was greeted with a custom all metal clodbuster , losi jrxt , and this old n crusty narrow front rc10 t...
Hello. I have an RC10T I purchased maybe 6 years ago and sparingly used in the driveway and things like that. My daughter now has an interest so I just purchased a new lipo battery and we went out to try it. It’s an rtr truck with the controller...
Last post
I have trouble with pics too. What I do is (and there are several what I do is methods out there from various members) I share/text the pic to myself then save it to my phone then attach it to my post. Sending it to myself in a text seems to reduce...
What is the inside dimensions on a factory team RC10T3 box? Reason why I ask is I have a T3 original FT box on its way to me and need to know if my assembled T3 will fit in it. It’s been a very long time since I had any original boxes for the 10T,...
Last post
Well that answers my question guys, thanks. To comfortably fit the truck, it’s wheels/tires, I will disconnect the arms on one side and bag the components. Next I will continue my quest for a T2 box and 10T box.
Build is basically complete. Still some minor details to be ironed out. I wanted to build it as close to the instruction manual photos as I could. This is impossible as different equipment is shown in defferent sections of the manual. I will likely...
Last post
^ Aha! That was bugging me too. Thanks!
I have buggy style hubs and finally a SCR battery pack coming. Still looking for a donor buggy front plate that I can modify to match the manual. Please let me know if you have one available. Thanks!
This is my second purple RC10T build. However I bought this truck instead of building it from parts. It was a very nice build, but I still gave it a full rebuild to bring it up to my standards.
I changed out much of the hardware, ballstuds, arms,...
Last post
Awesome looking truck. I think those Pro 45 front tires are the best looking tires in the history of ever.
I seem to remember a thread about installing a gear diff from a current Associated buggy into the RC10GT transmission? But I can’t seem to find the thread. Anyone know about this? Thanks
Hi everyone, a neighbor down the street gave me her son's RC10T from when we was a teenager in the 90s. Complete with box (says model 7011) and manual and 75mhz controller.
I put fresh batteries in it (7.2v 5000aH and replaced AA duracells that...
Last post
Try swapping the steering servo and throttle servo plugs on the receiver. After that if the steering doesn't move the truck froward or backwards and the throttle servo still doesn't move then its the servo. If the servo does move then its the...
What is the difference between the original stealth tranny and the T2/T3 tranny? I have been told it’s the gear case and the diff gear? Is that the same as a Losi XXX-T too?
Last post
yes they are all similar in being three gear, but more than half of parts are different. Different trans case, diff gear, rings, idler gear, motor plate. The top shafts can swap; bearings, diff balls and thrust assembly also all cross between...
I posted a couple years ago about having some issues with my RC10GT that I converted to brushless. It just would not put the power down. I drive mostly on the street just fooling around and that ball diff would inevitably chirp and get gritty after...
Last post
Nice! U need to start doing videos on youtube like johnnyq90
Definitely thought about it, but when it comes time to do stuff I just want to get it done and not worry about camera position, lighting, etc. It can easily double the time it takes to...
There's a guy here selling an RC10GT front and rear (but nothing else).
The front end looks complete, mounted on front plate and including steering, suspension, shocks, shock towers and wheels, etc.
The rear includes suspension, shocks, stealth...
Has anyone had a Rc10 with a buggy body? I remember seeing a pic of one in the forums but I cant find it again. If so what pieces are needed?
Last post
yes- minus King Cab which used a hex wheel instead of the wide 5 style hub. IIRC the offset was a bit weird on those as well. For the traditional Tamiya wide 5 wheels like Blackfoot series, lunchbox series, etc you just need the rear wheel adapters,...
Here is something I have been working on and hope works out to be fairly durable, but we'll see. There is still a fair bit to do, but thought I would let everyone in on the fun. DSC_0228small.jpg DSC_0229small.jpg DSCN6489.jpg
Last post
What wheels did you use in this pic? I think I might copy your original build idea. rc10t wheels.jpg
Anybody ever seen a T2 with a dark blue anodized tub? I recently came across one for sale that's stated to have been bought from a former factory driver. The truck looks super clean, but it's got what appears to be a dark blue anodized tub in the...
Last post
yep, i remember seeing a badboyz chassis fairly dark blue compared to the team stuff.
gammacrush had one you can see in the blurry images:
I did a trade the other day for an Rc10t3 on Craigslist. I got the truck and it is in pretty good condition. The only problem is that it says Reedy special edition on the box and if you try to look it up its...
Last post
factory built vs factory team is different all around. Factory Team gets you hard anodized shocks, MIP CVD's, Graphite molded chassis, and possibly other factory team parts. The edition you have is the RTR, so it has regular plastics, blue shocks,...
Users browsing this forum: No registered users and 12 guests
Forum permissions
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot post attachments in this forum
