Page 1 of 1
Rc10 6gear 15t pinion
Posted: Mon Mar 06, 2023 6:54 pm
by rwordenjr
Using stock 54t spur with 15t pinion and Trinity 27t stock brushed motor. Should this combo be safe enough for the 6 gear tranny ?
Re: Rc10 6gear 15t pinion
Posted: Mon Mar 06, 2023 8:59 pm
by juicedcoupe
It's probably fine for the transmission. That motor probably isn't going to like it much. If it'll fit, I'd probably use a 13T pinion.
It's easier to get the gear ratio correct with 48 pitch gears, opposed to the original 32 pitch. They are also easier to find.
Re: Rc10 6gear 15t pinion
Posted: Mon Mar 06, 2023 11:52 pm
by rwordenjr
juicedcoupe wrote: ↑Mon Mar 06, 2023 8:59 pm
It's probably fine for the transmission. That motor probably isn't going to like it much. If it'll fit, I'd probably use a 13T pinion.
It's easier to get the gear ratio correct with 48 pitch gears, opposed to the original 32 pitch. They are also easier to find.
Okay I’ll get a 13t pinion for it. It’s a Trinity 1987 monster horsepower stock motor. And this car id like to keep 32p since my other rc10s are all 48p stealth’s