I wanted to build something a little different after picking up a well-used and poorly-dyed Lightz fiberglass oval conversion. This is the result after filling extra holes and damage, sanding and painting the chassis.
- JCAR DDS tranny
- Raborn sliders & rear arms
- Cheetah QC/DC battery system
- RPM rear hubs, JG rear oval body mount, Delta shocks, Trinity & Tecnacraft turnbuckles
- Maxcell MC2 Panasonic P-170's, Tekin 411P esc & receiver, Big Jim green stock motor, TRC Stealth antenna
- Team Cobra rear wheel adapters with BSR caps, BRAND-X blue BBS foams
It's been a while since I built an RC10. So I figured it was finally time to open a NIP Lightz oval conversion I've had for many years.
There's nothing fancy on this one and I built it as more of a gearbox club racer.
This will be my attempt at building an oval car. The car will be built using many original and period parts. Only a few re-re parts will be used such as the shocks and a few bits I couldn't find in the condition I wanted. I plan on running the car...
Last post
Never been an oval fan, but this is a really good looking car.
Hi All
Have a few questions about a conversion kit I found.
It's an RCH oval conversion kit.
Anybody ever heard of it?
Anybody use one back in the day?
Any pics of one built?
I will ad a pic later of the kit I have.
Thanks
Mike
Last post
Here's the pics, sorry it took so long camera software issues.
I think I have most of the hardware, problem is the bag had a few holes in it.
When I get a chance I will try to figure out how to scan and upload the manual and color ad, it has parts...
Well, i have some Andy's parts and want to know what all came w/ the conversion, and if someone has a pic of individual oarts, post them up :!: :!: :P
Last post
Well, i got some parts in a RC10T trade and i asked someone and they said it was from Andy's, if thats all the parts, i have them all except for the rear hubs!!!!!!!! :mrgreen: :mrgreen: I just need to know for when i either sell them or make an...
I believe that I just acquired some incredibly rare and cool pieces of RC history, so I am starting this thread to discuss the company and its products.
Very little (if any) information seems to be available on the Internet about Lightz Products. I...
Last post
I had a look and the ads never changed, all the same....
got bored today, snapped some pics of a couple projects that are pretty much done.
first is a rpm ultra-molded chassis conversion for the rc10.
full-on rpm besides the trans, i keep forgetting to order a rpm trans for it as well as a b2 body that...
Last post
Thanks Hoopty... I'll pass by one of the LHS here and check out their Trinity wheels.
I have one of these and never finished building it. Still needs shocks built. I am curious what it may be worth. I'm guessing not many were sold since I can't find anything to get an idea of what people may be paying. This is not a for sale thread,...
Last post
Completed listings on ebay are gonna give you the best answer.