RPM “ 91 Worlds “ with Composite Craft chassis
- MarkyDents
- Approved Member
- Posts: 1019
- Joined: Sun Jan 10, 2021 11:52 am
- Location: Staten Island, N.Y.
- Has thanked: 1332 times
- Been thanked: 509 times
Re: RPM “ 91 Worlds “ with Composite Craft chassis
I realized I completely neglected to mention that this car came with most of the proper makings of a Team Losi Hydra-Drive (sans the HD itself) today I managed to pick one up for it.
Here’s what pieces are present as of now.
Here’s what pieces are present as of now.
Who do you race for ?
Me……. I race for me.
That’s impossible, I was told you need a sponsor to race.
Hey Cru ! Go balls out
Me……. I race for me.
That’s impossible, I was told you need a sponsor to race.
Hey Cru ! Go balls out
- jcwrks
- Approved Member
- Posts: 533
- Joined: Wed Jun 21, 2017 3:40 pm
- Location: San Angelo, TX
- Has thanked: 119 times
- Been thanked: 249 times
Re: RPM “ 91 Worlds “ with Composite Craft chassis
You won't use the round plastic spring cup to the left of the spring in your pic. You do need the smaller one (LOSA 3124) that goes on the end of the small spring (only use 1 of course) with the nut topping it off. Not sure if a plain washer would suffice since there is nothing to keep the spring centered otherwise.
http://vintagelosi.com/Instructions_files/HydraDrive_A3100.pdf
http://vintagelosi.com/Instructions_files/HydraDrive_A3100.pdf
The official TX SKUNK
- MarkyDents
- Approved Member
- Posts: 1019
- Joined: Sun Jan 10, 2021 11:52 am
- Location: Staten Island, N.Y.
- Has thanked: 1332 times
- Been thanked: 509 times
Re: RPM “ 91 Worlds “ with Composite Craft chassis
Luckily a buddy of mine had some HD pieces I was able to get off of him.
Who do you race for ?
Me……. I race for me.
That’s impossible, I was told you need a sponsor to race.
Hey Cru ! Go balls out
Me……. I race for me.
That’s impossible, I was told you need a sponsor to race.
Hey Cru ! Go balls out
- MarkyDents
- Approved Member
- Posts: 1019
- Joined: Sun Jan 10, 2021 11:52 am
- Location: Staten Island, N.Y.
- Has thanked: 1332 times
- Been thanked: 509 times
Re: RPM “ 91 Worlds “ with Composite Craft chassis
And finally I feel better about the front springs
Who do you race for ?
Me……. I race for me.
That’s impossible, I was told you need a sponsor to race.
Hey Cru ! Go balls out
Me……. I race for me.
That’s impossible, I was told you need a sponsor to race.
Hey Cru ! Go balls out
- juicedcoupe
- Super Member
- Posts: 2975
- Joined: Sun Aug 16, 2020 4:05 pm
- Location: Pascagoula, MS
- Has thanked: 229 times
- Been thanked: 1737 times
Re: RPM “ 91 Worlds “ with Composite Craft chassis
10T silver fronts are pretty close, especially if you use the early spring cups and later style upper locators. That is what I used on my Graphite with 1.02 fronts.MarkyDents wrote: ↑Sat Jun 11, 2022 2:24 pm And finally I feel better about the front springs
6D49A9C2-ACF9-4E32-B8C9-76656B8FE024.jpeg
Always looking for new and interesting ways to waste money.
- MarkyDents
- Approved Member
- Posts: 1019
- Joined: Sun Jan 10, 2021 11:52 am
- Location: Staten Island, N.Y.
- Has thanked: 1332 times
- Been thanked: 509 times
Re: RPM “ 91 Worlds “ with Composite Craft chassis
Oh ok cool, great to knowjuicedcoupe wrote: ↑Sat Jun 11, 2022 3:03 pm10T silver fronts are pretty close, especially if you use the early spring cups and later style upper locators. That is what I used on my Graphite with 1.02 fronts.MarkyDents wrote: ↑Sat Jun 11, 2022 2:24 pm And finally I feel better about the front springs
6D49A9C2-ACF9-4E32-B8C9-76656B8FE024.jpeg
Who do you race for ?
Me……. I race for me.
That’s impossible, I was told you need a sponsor to race.
Hey Cru ! Go balls out
Me……. I race for me.
That’s impossible, I was told you need a sponsor to race.
Hey Cru ! Go balls out
- MarkyDents
- Approved Member
- Posts: 1019
- Joined: Sun Jan 10, 2021 11:52 am
- Location: Staten Island, N.Y.
- Has thanked: 1332 times
- Been thanked: 509 times
Re: RPM “ 91 Worlds “ with Composite Craft chassis
I wish I was, but unfortunately it still is as last seen. Currently living vicariously through your beautiful build
Who do you race for ?
Me……. I race for me.
That’s impossible, I was told you need a sponsor to race.
Hey Cru ! Go balls out
Me……. I race for me.
That’s impossible, I was told you need a sponsor to race.
Hey Cru ! Go balls out
- jcwrks
- Approved Member
- Posts: 533
- Joined: Wed Jun 21, 2017 3:40 pm
- Location: San Angelo, TX
- Has thanked: 119 times
- Been thanked: 249 times
Re: RPM “ 91 Worlds “ with Composite Craft chassis
Many thanks. Send me your build, with a blank check, and I can finish it for you.MarkyDents wrote: ↑Thu Oct 12, 2023 9:30 am I wish I was, but unfortunately it still is as last seen. Currently living vicariously through your beautiful build
The official TX SKUNK
- MarkyDents
- Approved Member
- Posts: 1019
- Joined: Sun Jan 10, 2021 11:52 am
- Location: Staten Island, N.Y.
- Has thanked: 1332 times
- Been thanked: 509 times
Re: RPM “ 91 Worlds “ with Composite Craft chassis
AWESOME !! I’ll let you know once it’s boxed upjcwrks wrote: ↑Tue Oct 31, 2023 11:46 amMany thanks. Send me your build, with a blank check, and I can finish it for you.MarkyDents wrote: ↑Thu Oct 12, 2023 9:30 am I wish I was, but unfortunately it still is as last seen. Currently living vicariously through your beautiful build
Who do you race for ?
Me……. I race for me.
That’s impossible, I was told you need a sponsor to race.
Hey Cru ! Go balls out
Me……. I race for me.
That’s impossible, I was told you need a sponsor to race.
Hey Cru ! Go balls out
-
- Approved Member
- Posts: 61
- Joined: Wed Mar 03, 2021 8:15 pm
- Location: So Cal
- Has thanked: 51 times
- Been thanked: 45 times
Re: RPM “ 91 Worlds “ with Composite Craft chassis
Heck I probably have a set or two of those and the softer yellow springs..
- MarkyDents
- Approved Member
- Posts: 1019
- Joined: Sun Jan 10, 2021 11:52 am
- Location: Staten Island, N.Y.
- Has thanked: 1332 times
- Been thanked: 509 times
Re: RPM “ 91 Worlds “ with Composite Craft chassis
Btw probably the only description I’ve ever seen of the springs short of medium and soft.
Who do you race for ?
Me……. I race for me.
That’s impossible, I was told you need a sponsor to race.
Hey Cru ! Go balls out
Me……. I race for me.
That’s impossible, I was told you need a sponsor to race.
Hey Cru ! Go balls out
Create an account or sign in to join the discussion
You need to be a member in order to post a reply
Create an account
Not a member? register to join our community
Members can start their own topics & subscribe to topics
It’s free and only takes a minute
Sign in
-
- Similar Topics
- Replies
- Views
- Last post
-
- 63 Replies
- 11387 Views
-
Last post by Peakey
-
- 47 Replies
- 2308 Views
-
Last post by jcwrks
-
- 15 Replies
- 2516 Views
-
Last post by asashaw
-
- 6 Replies
- 858 Views
-
Last post by jwscab
-
- 6 Replies
- 1506 Views
-
Last post by scr8p
-
- 6 Replies
- 631 Views
-
Last post by scr8p
-
- 7 Replies
- 2040 Views
-
Last post by Showcase1186
-
- 17 Replies
- 3443 Views
-
Last post by Twistedaxle
Who is online
Users browsing this forum: Google Adsense [Bot], Retro rc, Tbot [Bot] and 12 guests