Page 1 of 1
Hello from Devon, UK
Posted: Tue Oct 20, 2020 2:32 pm
by jasonsanders
Hi All
I used to be into RC has a kid and had the usual Tamiya's and Nitro RC Cars.
Recently I was at a Car Boot sale (Think Flea Market) and stumbled across a box of random RC bits, amongst them was this little beauty.
Cost me a whopping £5!
Would like to restore it, maybe tastefully modify it with better bearings / gears etc. I'm open to suggestions.
Has anyone got any tips on reducing the visibility of scratches on the bottom of the chassis?
Re: Hello from Devon, UK
Posted: Tue Oct 20, 2020 3:02 pm
by Synergy
Welcome to the board from a fellow UK member
That has got to be up there with the best RC10 deals ever
Give it a good clean with hot water and washing up liquid and then you’ll get a better idea on what you’re starting with.
I don’t think there are any easy remedies for scratches on the chassis if you want to retain the anodised finish other than a replacement but I could be wrong. Often people go the painted or powder coated direction depending on how badly it is scratched.
Stick a thread in the vintage RC10 buggy section tracking your cleaning and rebuilding progress and members will chip in with suggestions and upgrades depending on what you’d like to achieve.
This is a great place, members are extremely knowledgeable and helpful.
Re: Hello from Devon, UK
Posted: Tue Oct 20, 2020 3:19 pm
by jasonsanders
Thanks for the welcome, I plan on stripping it all down and putting it in the ultrasonic cleaner.
Will then peroxide the nylon to bring it back to white (my other hobby/money sink is old computers so retrobrite a lot of plastics)
I also got a Mardave Cobra TQ in the box of bits which is more complete, parts for that are also readily available
Re: Hello from Devon, UK
Posted: Tue Oct 20, 2020 4:11 pm
by XLR8
Welcome aboard Jason.
That's a great find and at an awesome price. Well done sir!
You might want to do a thorough cleanup before deciding what to do about the scratches on the tub. I'm not aware of any process to touch up scratches and make them completely invisible. However, if the scratches are confined to the bottom, you won't see them anyway.
Remember, an item is only original once. If you paint, powder coat or even if you have the tub re-anodized, it will no longer be original and the color probably won't match other anno parts on the car. Some of my most cherished RC's have a few scratches and I don't let it bother me because I prefer to keep them original.
Anyway, it's just a suggestion of course.
I hope you post your restoration project in the appropriate forum so we can admire it.
Re: Hello from Devon, UK
Posted: Tue Oct 20, 2020 5:33 pm
by jasonsanders
XLR8 wrote: ↑Tue Oct 20, 2020 4:11 pm
Welcome aboard Jason.
That's a great find and at an awesome price. Well done sir!
You might want to do a thorough cleanup before deciding what to do about the scratches on the tub. I'm not aware of any process to touch up scratches and make them completely invisible. However, if the scratches are confined to the bottom, you won't see them anyway.
Remember, an item is only original once. If you paint, powder coat or even if you have the tub re-anodized, it will no longer be original and the color probably won't match other anno parts on the car. Some of my most cherished RC's have a few scratches and I don't let it bother me because I prefer to keep them original.
Anyway, it's just a suggestion of course.
I hope you post your restoration project in the appropriate forum so we can admire it.
Hi yes, I don't want to refinish the tub, might just clean it up and maybe cover the bottom in some clear protective vinyl, to stop it getting any worse but not to hide or destroy it
Re: Hello from Devon, UK
Posted: Tue Oct 20, 2020 10:22 pm
by Burniefloyd
So how bad is the bottom? I don't see a pic in either thread.
Re: Hello from Devon, UK
Posted: Tue Oct 20, 2020 10:48 pm
by coxbros1
if u can find a gold Sharpie it helps with the scratches on aluminum....if not play around with yellow and orange Sharpies at the same time until it gets pretty close. i did with a vintage Lemans 480gold motor....real respectable results
