Length of ASC 9754 CVA Bone

[BACK_AT_IT]

I have a CVA but not sure which ASC number it is. I believe it might be a ASC 9754. Tried finding the length end to end online but no luck. Can anyone help with this?

Thx!

[jwscab]

that part number is listed as a b44 rear bone. As far as I recall, these are used typically with the WOIN builds and are slightly shorter than B4 bones, which I think are 67mm. So they are likely 65-66mm. the RC10 bone is about 60-61mm I believe.

now, the other issue is how that dimension is measured. I think everyone does it differently, where I think it should be center to center of the pin-pin or pin-cup/ball center. Some companies list the overall length, which isn't truly useful honestly.

at some point, I wanted to make a thread listing a bunch of bone lengths, but never got around to it.

[BACK_AT_IT]

Thanks!

[radioactivity]

The 9754 according to Associated should measure ... 9754 Rear CVA Bones B44 B44.3 RC10B44.1 62.7mm c/c, 68.7mm e/e
I pulled one side off a B4/B44 setup I have on a car and measured appx. 62.5mm center of pin to center of pin.
Pretty sure you add about 6mm to find overall length.

Chuck

[jwscab]

cool, thanks for the pic!

[BACK_AT_IT]

Yes the pic is great thank you. With my less sophisticated measurement device I’m about 63-64 mm. So it’s likely the 9754.
Thanks guys!