RC10Talk - The Net's Largest Vintage R/C Community

just won this rc10gt http://www.ebay.com/itm/321778764258?_trksid=p2060353.m2748.l2649&ssPageName=STRK%3AMEBIDX%3AIT
i know tbg sells rc10gt bodies, but which one is correct for this chassis/rc10gt. please post up ebay tbg body link on post. thanks mike
ALSO i was looking into swapping out the frt arms to rpm to match the rears. which ones do i buy rc10gt or rc10gt2 rpm frt arms?

Hi Hugger,

http://www3.towerhobbies.com/cgi-bin/wti0001p?&I=LXEU88&P=7

Cheers, Dave.

I'm pretty sure it's this one

http://www.ebay.com/itm/3078-RC10GT-RC10-GT-F150-TRUCK-BODY-for-the-blue-gt-chassis-team-associated-/111497382528?pt=LH_DefaultDomain_0&hash=item19f5c30a80

would this body work? http://www.ebay.com/itm/ASSOCIATED-6134-RC10GT-RC10-GT-TRUCK-BODY-VINTAGE-GAS-NITRO-/111591434767

That body would work, it came with the RTR blue chassis GT's while the other one came with the FT versions

RC10th wrote:That body would work, it came with the RTR blue chassis GT's while the other one came with the FT versions

so this body would fit? http://www.ebay.com/itm/ASSOCIATED-6134-RC10GT-RC10-GT-TRUCK-BODY-VINTAGE-GAS-NITRO-/111591434767

It will work, just beware that the blue chassis trucks are longer then tub trucks.

than ill go with this body looks to be a little longer plus its a little cheaper http://www.ebay.com/itm/151567770978?_trksid=p2060353.m1438.l2649&ssPageName=STRK%3AMEBIDX%3AIT

hugger19 wrote:than ill go with this body looks to be a little longer plus its a little cheaper http://www.ebay.com/itm/151567770978?_trksid=p2060353.m1438.l2649&ssPageName=STRK%3AMEBIDX%3AIT

That body is a early tub chassis body and will not fit unless you do the early rear shock tower swap. The 6134 and the f150 bodies will both fit with no modification. Your truck appears to be either the "rtr plus" or "team built" version, which both originally came with the proline Chevy Silverado body.

justinspeed79 wrote:

hugger19 wrote:than ill go with this body looks to be a little longer plus its a little cheaper http://www.ebay.com/itm/151567770978?_trksid=p2060353.m1438.l2649&ssPageName=STRK%3AMEBIDX%3AIT

That body is a early tub chassis body and will not fit unless you do the early rear shock tower swap. The 6134 and the f150 bodies will both fit with no modification. Your truck appears to be either the "rtr plus" or "team built" version, which both originally came with the proline Chevy Silverado body.

so is this the body u r talking about??? http://www.ebay.com/itm/Associated-Interceptor-Body-Clear-RC10GT2-ASC7992-/400927310954?pt=LH_DefaultDomain_0&hash=item5d5921446a

No, that's the gt2 interceptor body. That body can work with some minor mods. This is the original. Was also available from associated in blue, and from proline unpainted. Unfortunately none of the original gt bodies are being made anymore (unless you count the tower hobbies ST15), and are not easy to find.

http://www.stormerhobbies.com/cgi-bin/seekpart.pl?pn=ASC7184R

u mean this st15 http://www.ebay.com/itm/NEW-Tower-Hobbies-Body-Clear-ST-15-TOWC6300-NIB-/291133011247?pt=LH_DefaultDomain_0&hash=item43c8e1352f

Yes, that's the original gt body being resold by tower. That's also for the early narrow shock tower setup. Also, after looking at the gt2 body again, it looks like you would need to do the shock tower swap to run that one too.

lol i thought finding a body was going to be easy. i think iam going with this one. http://www.ebay.com/itm/9516-RC10GT-RC10-GT-TRUCK-BODY-VINTAGE-GAS-NITRO-/151567770978 looks close to that rc10gt chevy truck body u sent me by stormer hobbies. thanks.

There is also a guy on eBay selling painted crowd pleazer bodies that fit your truck. Look up the seller dsloomer and or search RC10GT body, It should be one of the top results. Don't search crowd pleazer, he doesn't list the name, I think because they are repops, but that's what they are.