#6474 spring cup, and clamp question
- marlo
- Approved Member
- Posts: 2071
- Joined: Tue Jan 22, 2013 5:31 pm
- Has thanked: 21 times
- Been thanked: 21 times
#6474 spring cup, and clamp question
My question is did the original white spring cups, and clamps #6474 ever come in black. I know the B2/T2 are black with same part number, but are the updated part type.
Any help would be appreciated. I'm sure I've seen them, but faded memories tend to be unreliable.
Any help would be appreciated. I'm sure I've seen them, but faded memories tend to be unreliable.
- GoMachV
- Super Member
- Posts: 11330
- Joined: Sun Apr 29, 2012 10:31 pm
- Location: Twin Falls, ID
- Has thanked: 822 times
- Been thanked: 2418 times
Re: #6474 spring cup, and clamp question
Yes I remember them as well.
It's time to stand up to the bully. Support the companies that support the industry, not the ones that tear it down. Say no to Traxxas
Factory Works website
Factory Works website
- RC10th
- Approved Member
- Posts: 4293
- Joined: Sat Feb 16, 2013 9:51 am
- Location: Australia
- Has thanked: 40 times
- Been thanked: 1017 times
Re: #6474 spring cup, and clamp question
I believe they did as well.
I'm also pretty positive AE dyed some of their parts black.
I'm also pretty positive AE dyed some of their parts black.
I was old school - when old school wasn't cool !
- slotcarrod
- Approved Member
- Posts: 4415
- Joined: Tue Nov 25, 2008 10:57 pm
- Location: Calgary Alberta Canada
- Has thanked: 1 time
- Been thanked: 41 times
Re: #6474 spring cup, and clamp question
For sure there were black ones but in black plastic, not dyed!
Rod Littau
Slotcarrod's Rumpus Room: http://www.rc10talk.com/viewtopic.php?f=77&t=16113
25 Years of the RC10: http://www.rc10talk.com/viewtopic.php?f=35&t=13059
Slotcarrod's Rumpus Room: http://www.rc10talk.com/viewtopic.php?f=77&t=16113
25 Years of the RC10: http://www.rc10talk.com/viewtopic.php?f=35&t=13059
- littleVETTE
- Approved Member
- Posts: 1418
- Joined: Mon Aug 11, 2008 4:07 pm
- Location: U.S.A.
- Has thanked: 6 times
- Been thanked: 9 times
- littleVETTE
- Approved Member
- Posts: 1418
- Joined: Mon Aug 11, 2008 4:07 pm
- Location: U.S.A.
- Has thanked: 6 times
- Been thanked: 9 times
Re: #6474 spring cup, and clamp question
i didn't open this particular pack, but i have opened a set of these clamps and cups and other early parts that came in black. they are not dyed. the 'not for resale' stamp was from the factory when they sent parts to their sponsored drivers.
- marlo
- Approved Member
- Posts: 2071
- Joined: Tue Jan 22, 2013 5:31 pm
- Has thanked: 21 times
- Been thanked: 21 times
Re: #6474 spring cup, and clamp question
Not to derail my own thread, or to say anyone is wrong, the cup/clamps may never have been dyed, but I'm sure some other parts were. Here is a pic of a nip unopened set of #6365 rear hub carriers that I'm sure started out in life as white.
I had a hard time getting the light to work for this pic, but you can clearly see on the left carrier a purple area.
I had a hard time getting the light to work for this pic, but you can clearly see on the left carrier a purple area.
- RC10th
- Approved Member
- Posts: 4293
- Joined: Sat Feb 16, 2013 9:51 am
- Location: Australia
- Has thanked: 40 times
- Been thanked: 1017 times
Re: #6474 spring cup, and clamp question
I swear I've seen dyed caster blocks too.
I was old school - when old school wasn't cool !
- slotcarrod
- Approved Member
- Posts: 4415
- Joined: Tue Nov 25, 2008 10:57 pm
- Location: Calgary Alberta Canada
- Has thanked: 1 time
- Been thanked: 41 times
Re: #6474 spring cup, and clamp question
AE dying parts is news to me! Why would they bother? More likely someone swapped parts and lined back up the staple? I see this trick all the time at the hobby shop I work for. Criminal customers trying to return old or wrong product in new packages, they sometimes look just like that, unopened!
Rod Littau
Slotcarrod's Rumpus Room: http://www.rc10talk.com/viewtopic.php?f=77&t=16113
25 Years of the RC10: http://www.rc10talk.com/viewtopic.php?f=35&t=13059
Slotcarrod's Rumpus Room: http://www.rc10talk.com/viewtopic.php?f=77&t=16113
25 Years of the RC10: http://www.rc10talk.com/viewtopic.php?f=35&t=13059
- marlo
- Approved Member
- Posts: 2071
- Joined: Tue Jan 22, 2013 5:31 pm
- Has thanked: 21 times
- Been thanked: 21 times
Re: #6474 spring cup, and clamp question
I'm all too aware of that trick, when packs have been opened, then a staple ran back through, you would then need something like A small round tool to help bend the staple to copy an actual stapled, staple. Having said that, the tool would then leave some kind of scaring on the header card as the tool is removed, non of which are present. I'm very thorough we inspecting anything that goes into my collection. As for why it would be done, maybe during the parts colour transition, parts were dyed to match the currant catalogue demand, but who knows, like RJ sais earlier, I've seen it with other parts as well.slotcarrod wrote:AE dying parts is news to me! Why would they bother? More likely someone swapped parts and lined back up the staple? I see this trick all the time at the hobby shop I work for. Criminal customers trying to return old or wrong product in new packages, they sometimes look just like that, unopened!
Create an account or sign in to join the discussion
You need to be a member in order to post a reply
Create an account
Not a member? register to join our community
Members can start their own topics & subscribe to topics
It’s free and only takes a minute
Sign in
-
- Similar Topics
- Replies
- Views
- Last post
-
- 8 Replies
- 511 Views
-
Last post by treehugger
-
- 1 Replies
- 762 Views
-
Last post by Niki
-
- 7 Replies
- 872 Views
-
Last post by RCveteran
-
- 4 Replies
- 1506 Views
-
Last post by bluewormx
-
- 1 Replies
- 363 Views
-
Last post by scr8p
-
- 2 Replies
- 621 Views
-
Last post by galaxie292
-
- 8 Replies
- 1984 Views
-
Last post by Chewbacca
-
- 10 Replies
- 1206 Views
-
Last post by scr8p
Who is online
Users browsing this forum: No registered users and 8 guests