Page 1 of 1
Worlds wheels on an A stamp.
Posted: Sun Jan 18, 2015 11:22 pm
by sschering
I put the worlds wheels 6805 rear, 9688 front on my A stamp this week.
I think the offset is a little tight in the rear
Re: Worlds wheels on an A stamp.
Posted: Sun Jan 18, 2015 11:39 pm
by DaveM
Hi,
Do you have any spacers on your axles if you do put all of them on the outside,
I think the new cva's axles are a little longer to take this spacer on
the outside.
http://www3.towerhobbies.com/cgi-bin/wti0001p?&I=LXEAD3&P=7
http://www3.towerhobbies.com/cgi-bin/wti0001p?&I=LXDWJD&P=7
Dave.
Re: Worlds wheels on an A stamp.
Posted: Sun Jan 18, 2015 11:48 pm
by DHood
B4 wheels? 1/4" or 3/16' axles?
Re: Worlds wheels on an A stamp.
Posted: Mon Jan 19, 2015 12:10 am
by sschering
1/4" original stub axles..
Amazing what you can do with a 1/4" drill bit..
I'll check for spacers.. thanks.
Everything clears but you can't use the outer shock mount hole on the rear arms.
Re: Worlds wheels on an A stamp.
Posted: Mon Jan 19, 2015 12:19 am
by DaveM
Hi,
Well there's your problem those wheels are designed to work with the two parts I gave you and
and these hubs.
http://www3.towerhobbies.com/cgi-bin/wti0001p?&I=LXEDZF&P=7
or the conversion kit,
http://www3.towerhobbies.com/cgi-bin/wti0001p?&I=LXDWJJ&P=7
Dave.
Re: Worlds wheels on an A stamp.
Posted: Mon Jan 19, 2015 8:52 am
by sschering
I"ll probably do the 6802 conversion kit.. thanks for the tip..
Will the 7364 white carriers work with that?
Re: Worlds wheels on an A stamp.
Posted: Mon Jan 19, 2015 9:15 am
by scr8p
the new worlds wheels have the same backspacing as an old tq wheel. so i really don't understand why there is such an offset issue on the back.
they don't really look like worlds wheels though......
Re: Worlds wheels on an A stamp.
Posted: Mon Jan 19, 2015 10:49 am
by slotcarrod
He looks like he has B4 wheels on the car, he needs these:
http://www3.towerhobbies.com/cgi-bin/wti0001p?&I=LXDWJL&P=M
Re: Worlds wheels on an A stamp.
Posted: Mon Jan 19, 2015 10:54 am
by sschering
Damn you are right .. These are 9689 wheels..
I'll go back to my cave feeling stupid now lol.
I didn't glue them so nothing lost but $5..
I also have a full set of Jconcepts wheels in white I could use if I convert the stub axles to 3/16. I bet they are the wrong ones too..
I only paid $16 shipped for the ties and wheels so it's not all that bad.
Re: Worlds wheels on an A stamp.
Posted: Mon Jan 19, 2015 7:25 pm
by DaveM
Hi,
Yes 7364 white carriers will work.
Quote" A person who never made a mistake never tried something new!"
Mistakes aren't failures it's called experience!
Dave.