Help With Yokomo Works '91

[Keyz]

Hi Guys,
I have a never run Yok Works 91, but I have the problem that I don't have the original rear wheels, wing or original tyres for it.

It looks from a lot of the pictures on here that they had the square block front tyres and a long pin type tyre in the rear.

I know hotlaps/yok tyres used to have the part numbers on the sides, so could someone please let me know the part # for the tyres?

Regarding the wheels, I have pink 2.0" rears with 4 mounting holes and pink 2.2" fronts with 2 mounting holes. Which are the correct standard wheels? I believe it is the 2.2" with 2 holes right?

And finally, does anyone have any idea on the part# for the original rear wing? AE's high downforce rear wing looks close, but isn't exactly the same.

Thanks very much,

Jim

[carloco8]

Jim, you need to get into the BST area. You will get a better response there and perhaps find just what you need

Here's how:
http://www.rc10talk.com/viewtopic.php?f=1&t=909

[Dual]

Hi Jim,

Just so you know what you are looking for when you enter the BST forum, here are the part numbers you will need-

Front Tires Works '91: TF-340M

Rear Tires Works '91: TR-38M or TR-32M (TR-38 are difficult to obtain)

Front Rims Works '91: ZC-831 Pink Design with 2 Holes

Rear Rims Works '91: ZC-837 Pink Design with 2 Holes

Rear Wing Works '91: ZC-108 (similar in design to Team Associated 6185 in case you can't locate one)

Hope this helps.

Vin

[Keyz]

Thanks guys.
Sorry, yes I have seen the BST post, just haven't been able to sort out getting onto it yet.

Thanks very much for the part numbers Dual! I thought the tyres were 31's and 310's..Doh!