RC10Talk - The Net's Largest Vintage R/C Community

i want to use the losi style hydra drive setup on the rc10 stealth trans. http://www.ebay.com/itm/Thorp-4774-Adapter-Kit-64-Pitch-HydraDrive-Team-Associated-RC10-RC10-/251547939843 so i need this shaft and this should be able to fit the losi dydra drive setup? http://www.ebay.com/itm/losi-hydra-drive-unit-complete-vintage-losi-vintage-rc-car-/151330013703 (pics i found off ebay)

if you have a 64 pitch diff gear and idler it'll work.

you will need this.



the thorp you posted is for 64 Pitch, unless you have a 64 pitch internals then its a match.

they also sell a 48 pitch http://www.ebay.com/itm/Thorp-4775-Adapter-Kit-48-Pitch-Hydra-Drive-Team-Associated-RC10-RC-10-/400720448871?pt=Radio_Control_Parts_Accessories&hash=item5d4ccccd67 either one will work in a stock stealth trans with stock internal gears?

slow_jun wrote:you will need this.



the thorp you posted is for 64 Pitch, unless you have a 64 pitch internals then its a match.

so is that different than the ones i have listed on here from ebay?

yup

hugger19 wrote:

slow_jun wrote:you will need this.



the thorp you posted is for 64 Pitch, unless you have a 64 pitch internals then its a match.

so is that different than the ones i have listed on here from ebay?

same function different manufacturer, one you showed from Thorp, mine posted came from LOSI.

hum ok........so than that fits in the stealth trans than i can bolt up the losi hydra unit with no issues.

o ok so different brands but the same part to do the same job

hugger19 wrote:hum ok........so than that fits in the stealth trans than i can bolt up the losi hydra unit with no issues.

by right is should, not unless the item was misrepresented to be for another car

it should do the job as expected. cheers..

sweet thanks for the help now need to pry open the old wallet