Page 1 of 1
bell crank part
Posted: Thu Feb 27, 2014 11:45 pm
by DMAT
Not exactly sure what to call it but its the part that your screw on to the car that allows the bearing to sit snugly.
im trying to find some alloy ones without purchasing a full bell crank kit.
Just trying to see if i can avoid putting out more money than needed getting the jconcepts one.
Re: bell crank part
Posted: Thu Feb 27, 2014 11:51 pm
by THUNDERSTRIKE1
The metal bearing posts like in the rps/losi alloy bellcranks?I have two of them if referring to them.Ive had them a while since the steering bellcrank was missing.Kinda hard to steer with no steer bellcrank !
don
Re: bell crank part
Posted: Thu Feb 27, 2014 11:57 pm
by DMAT
it might be called a stand off. either way its at 1/4" OD and screws onto a 8-32 screw.
Re: bell crank part
Posted: Fri Feb 28, 2014 12:49 am
by THUNDERSTRIKE1
Has a nut shape at bottom and takes a short 8-32 screw to mount to chassis and reduced at top into threads sticking up.Use either black or white flat delrin nut on top to secure bellcrank.Thats what i have.
if thats what you need pm shipping info i send them to you.don
Re: bell crank part
Posted: Fri Feb 28, 2014 9:23 am
by jwscab
If Don doesn't get you squared away, let me know. I can make some.
Re: bell crank part
Posted: Tue Mar 25, 2014 2:31 pm
by THUNDERSTRIKE1
He got squared away
while ago thanks to me.Don