I picked up a total of three rc10 last week and am in the process of rebuilding them probably for resale however I want to keep one for my self. It looks like there is a lighter gold edinger and two darker gold a stamps. Is one more valuable than the other?
Yesterday and today I had the time, so I worked on my latest no letter stamp on chassis early edinger, and rebuilt the shocks that have the notched pistons with 45Wt Silicone Oil; as well as redid the soldering and rewired the car with silicone wire...
Last post
Ruffy
I'll dig and see if I can find some from different angels
After being dormant since the late eighties I've decided to blow life into my old A stamp. I've been thinking of doing this for years, and now I'm posting the build here in the hope it will motivate me to actually get it finished. The goal is to get...
Last post
Trying out bell cranks with the cut nuts as shown above, to solve the problem of the stripped threads in the nose plate. Took away some material from the bell cranks to lower the ball ends for the steering rods. Also compensated with 0,75 mm washers...
well from the looks of it, it has the hard to find clear gear cover, lower shock cups early dual bellcranks and if u look real close those beat up tires on the buggy say goodyear. kinda odd though it has a black chassis? once i get it ill pull and...
Last post
its a curtis husting painted orginal thick lexan body :D
Lucky! 8)
If those are rub marks on the inside white paint, you could just gently clean the inside rub section with a Q-Tip and lacquer thinner. You may end up removing a tiny bit of paint...
it's hard to believe i just noticed this now. maybe i did know and just forgot, or it's just matter of finding it because of using certain parts.........
A stamp
001.JPG
B stamp
002.JPG
see the difference? i'll have to be careful with the...
will these work on the A stamp. I have the RPM rear arms and MIP cvd kit for the rc10 ( 1/4 axles).
Last post
steve thanks for the info . It was very helpful. I went with the 1.5 carriers. You really have to search the tower site for parts. With the rpm front and rear arms and the carriers and a few other parts i odered from tower I should have when...
I have a B stamp chassis. The 6 gear mount holes are there but they have not been countersunk. Do I have a rare chassis? Sorry about the bad pic. 038 (700x525).jpg
So, I put some pictures of this buggy in the e-bag forum but I have spent just a little while cleaning it up and looking over issues. The pan is extremely clean, I'd say new built, possibly never run. There are two or three very tiny marks on the...
Last post
I also do not know what the shock collars are. They're coming off and into the parts box for now. :wink:
These are Parma shock collars :wink: Very nice car!
Thank you for the identification of the collars and the compliement on the car. I was...