Page 1 of 1
Price Gouging- ASC6614 Idler gears
Posted: Thu Mar 28, 2013 8:51 pm
by LJH
Not sure where my original post went off top....seems to have been deleted.
Anyhow, looking options on where to buy the ASC6614 for a reasonable cost. Back in December I bought a set for $7.99 which while above List price seemed reasonable for a NOS part. Now they are one Ebay for $18-$25 a set. Seriously...5X the original cost is obserd.
I am in the process of restoring a full scale '84 Audi Quattro Coupe (1 of 64 imported in '84) and finding NOS is tough but doable and the dealers don't gouge the pricing at all.
I find it rude that someone in the community would take such measures to make an extra buck.
Cheers,
Jim
Re: Price Gouging- ASC6614 Idler gears
Posted: Thu Mar 28, 2013 8:59 pm
by GoMachV
...in dec they were still available. Now they are discontinued. I paid $40 for a few white ball cups once. That was far from my most ludicrous overpayment as well. When associated discontinued stuff, it gets expensive
Here is a set on Amazon for $25 Plus shipping...
http://www.amazon.com/gp/aw/d/B0006O71N4/ref=redir_mdp_mobile
Re: Price Gouging- ASC6614 Idler gears
Posted: Thu Mar 28, 2013 9:03 pm
by scr8p
i'd tell you to buy a stealth, but half of that crap is discontinued too.
there a place in england that'll sell you steel ones for like $15. or just make your own out of some 6 gear outdrives.
Re: Price Gouging- ASC6614 Idler gears
Posted: Thu Mar 28, 2013 9:08 pm
by GoMachV
Out drives are discontinued as well, but once you find a set they should last for a while! Probably easy to find worn out ones since your cutting off the cups anyway.
Going stealth is obviously a better option unless he is keeping it period correct. I have seen a few stealths for very little money on the bay lately.
Re: Price Gouging- ASC6614 Idler gears
Posted: Thu Mar 28, 2013 10:34 pm
by Charlie don't surf
LJH wrote:Not sure where my original post went off top....seems to have been deleted.
Anyhow, looking options on where to buy the ASC6614 for a reasonable cost. Back in December I bought a set for $7.99 which while above List price seemed reasonable for a NOS part. Now they are one Ebay for $18-$25 a set. Seriously...5X the original cost is obserd.
I am in the process of restoring a full scale '84 Audi Quattro Coupe (1 of 64 imported in '84) and finding NOS is tough but doable and the dealers don't gouge the pricing at all.
I find it rude that someone in the community would take such measures to make an extra buck.
Cheers,oi
Jim
it was moved because it had an eBay link, a complaint, and a rant all at the same time. We have places for all of those things, but its not in the RC10 section. I apologize in advance if you offended by parts that were discoed 25 years ago are more than retail. Wait it out until you find ones that fit your budget, that's always an option-
Re: Price Gouging- ASC6614 Idler gears
Posted: Fri Mar 29, 2013 12:22 am
by delsami
i wonder how many protech bodies were made cuz they are still available lol
Re: Price Gouging- ASC6614 Idler gears
Posted: Fri Mar 29, 2013 12:31 am
by scr8p
an original protech is still worth more. the window nets are different on the chinese ones.
Re: Price Gouging- ASC6614 Idler gears
Posted: Fri Mar 29, 2013 12:43 am
by losiXXXman
gomachv wrote:Out drives are discontinued as well, but once you find a set they should last for a while! Probably easy to find worn out ones since your cutting off the cups anyway.
Going stealth is obviously a better option unless he is keeping it period correct. I have seen a few stealths for very little money on the bay lately.
Stealths have been kind of down lately
I sold my last RC10 about 18 months ago, cause stealths were doing $48-65 every time. And I was DONE with the 6gear. Maybe it'd be a good time to pick one up for when I build a pan again. just checking, in the last month, almost all have been under $32. I saw several under $20 even..
Re: Price Gouging- ASC6614 Idler gears
Posted: Fri Mar 29, 2013 8:41 am
by askbob
Yes, fleabay is ridiculously slow both buying and selling right now and for the last few months.
Re: Price Gouging- ASC6614 Idler gears
Posted: Fri Mar 29, 2013 9:05 pm
by klavy69
They've been selling for that cheap for a long time. Just depends on how pretty you want it to look
Todd
Re: Price Gouging- ASC6614 Idler gears
Posted: Fri Mar 29, 2013 9:36 pm
by 85Edinger
Why is everyone so down on the 6 gear? Build it right, put in steel idlers, and you've got a reliable, low-maintenance transmission that's actually rather efficient. The hardest part is de-burring the old gears.
Re: Price Gouging- ASC6614 Idler gears
Posted: Sat Apr 06, 2013 4:45 pm
by clutchcargo
Yea i was the DUMMY that drove the prices up, but if the trans goes bad i have a few new parts. AE should re pop some stuff like tamiya.
Re: Price Gouging- ASC6614 Idler gears
Posted: Sat Apr 06, 2013 6:48 pm
by DMAT
on the topic of idlers. RW Racing does have some 6 gear and stealth idlers. I asked about buying but no reply.
aside for him, i havent seen any idlers for the 6 gear anywhere. I know they are disc but was there any aftermarket supplier that still has them?