I'll see if I can find some...it made me laugh when it came off but I was thankful it was such an easy fix! I thought Ide broken the knuckle off until I got closer.
Matt
A trick i used years ago for that style axle was drill it and the front axle carrier an used a rear axle drive pin in it.Or switch to inline axles and hubs never happen again.DON
I was going to hold off until I got further in the build, but I got board today. I been collecting a few parts here and there, and will continue to for a while longer due to some short term financial issues.
A few left over parts were left on the...
Last post
Well, I've been playing around with the idea of taking the RC10 graphite runner and doing a current WOIN build with it.
Some ideas I've been playing around with first as the layout of the electronics and using a shorty pack. Most of my batteries...
Hi Guys,
I have a RC10 Graphite Team Car that I’m going to be racing in our vintage class here and in Australia. I am going to have to run a a 6-Gear Box in order for it to be compliant.
- Anyone that runs one of these on dirt can give me a few set...
Last post
- It seems to have a bit of bump steer (A&L Steering) ….but if I space the steering rod up it will hit on the inner suspension ball joints?
What ball studs and cups are you using?
There are a few options for getting more room around the upper...
Hey all i have a 1987 rc10 goldpan picked it up off my lil nephew and was thinking of doing a lil winter rebuild with my son but it doesnt have a body or wing ,,and i know this has been probably asked a million times but for all the replacement...
Last post
Dang, Those foams held up well! :shock: Nice looking project. :D
Thanks,,,foams are on their way to the UK but yeahh they were in good shape and hopefully they last another 20+ years :)
You guys have been helpful putting my old RC10 back together. I have replaced worn/damaged parts on the suspension and have taken everything apart and cleaned and rebuilt. I am planning on racing it at my track and need advice on what would be a...
Last post
Judging from the pics of that track, 10x3 to 8X1
My ESC will only work with over 13T. I also was thinking I might need something a little mild so I can get a little longer runtime.
New member here in the Indy area. Mine is a classic I found our childhood cars in the basement story. Got the DS and T2 up and running with updated transmiter/receivers ( They don't have crystals anymore?! ). 25 years later and these are...
Last post
Speaking of the stadium Blitzer, looks like the materials are all plastics. No need to rehydrate as with the nylon on a team associated vintage car, right?
I put my old RC10 back together and took it to a race last weekend and ended up breaking a rear hub carrier. I wanted to know if I could use this to replace it:
I also looked at these other replacement parts from RPM and wanted to know if these...
Last post
do you have the short arms? if so i would just upgrade to the longer arms and replace the tie rods. other than that the best place to find replacement short arms would be ebay of from one of the member here. honestly you will like the rpm arms you...
Please just move on if you get annoyed by my ignorance :oops:
I have a couple of old goldpans that have been collecting dust for years. I put them away when I realized I had no tools (imperial) to work on them....
But now, with the remake of a 4wd...
Last post
Thanks to the kind people that helped me in the right direction, I have now concluded that both my RC10's started out as CE's. One early and one later.
One of them will be restored as a RC10 Championship Edition. I even think I have the correct,...
Ahrefs [Bot], 
GreenBar0n,