Page 1 of 1
Help with old 2.19 gear box clicking
Posted: Tue Jan 10, 2012 8:00 pm
by sgirouard
I'm hoping someone has an idea on this one. I have a XX and had a JRX2 do the same thing. The gear box clicks. I've pulled it apart and can't find a single flaw in it. The teeth are perfect, the ball diff is very smooth. The case is perfect.
Anyone know what causes this?
Re: Help with old 2.19 gear box clicking
Posted: Tue Jan 10, 2012 8:35 pm
by slapshot1979
Hockey card stuck in the spokes??
Is this installed hooked to axles and motor ?? Ive had a few of these gearboxes over the years and never had this?
Re: Help with old 2.19 gear box clicking
Posted: Tue Jan 10, 2012 8:46 pm
by sgirouard
Sorry, what do you mean "hooked to axles and motor"?
Re: Help with old 2.19 gear box clicking
Posted: Tue Jan 10, 2012 8:50 pm
by slapshot1979
Just looking for more info, is this installed in the car ready to run, or on the bench and you feel clicking when turning over by hand??
Re: Help with old 2.19 gear box clicking
Posted: Tue Jan 10, 2012 8:52 pm
by scr8p
is it the trans..... all by itself that's clicking? are you spinning the entire rear drivetrain without the motor and hearing the clicking?
Re: Help with old 2.19 gear box clicking
Posted: Tue Jan 10, 2012 9:27 pm
by Charlie don't surf
I have heard the backlash make clicks before-
Love the hockey card in the spokes
what is this hockey?
Re: Help with old 2.19 gear box clicking
Posted: Tue Jan 10, 2012 9:49 pm
by THUNDERSTRIKE1
Most the time its the wheel axle pin poping or clicking in the back of the wheel.DON
Re: Help with old 2.19 gear box clicking
Posted: Tue Jan 10, 2012 11:38 pm
by sgirouard
Thanks for the clarification.
This doesnt happen under free spin (no motor) or if you apply power with the vehicle off the ground, it only happens when I apply throttle and the vehicle is on the ground. It seems to drive just fine with the clicking, it's just one of "those things" I hate to hear. LOL
Re: Help with old 2.19 gear box clicking
Posted: Wed Jan 11, 2012 10:23 am
by mytimac
I am going to guess your driveshafts are hitting the arms in some way maybe. At least something with the driveshafts or axles. That would explain only when on the ground and you have a load on the shocks making the arms and driveshafts change angles. Maybe one of those pins in the axle joints?
Re: Help with old 2.19 gear box clicking
Posted: Wed Jan 11, 2012 11:58 am
by sgirouard
Good call. Makes sense. I'll look at that tonight. I keep going at the gear box looking for solutions.
PS THANK YOU FOR CHANGING YOUR AVATAR.
As the father of 3, I had my share of those noses and cringed everytime I saw your avatar LOL.
Re: Help with old 2.19 gear box clicking
Posted: Wed Feb 29, 2012 1:51 pm
by morpheus2010
Used to put a small piece of silicon tube in the drive cups to stop the T bar rattling about. That may help.
Re: Help with old 2.19 gear box clicking
Posted: Wed Feb 29, 2012 2:01 pm
by THUNDERSTRIKE1
Sometimes if idler is used and gets put back in traany but in the oppisite direction it was going before it clicks or tries to bind causing the click.If it is take it apart turn it around reinstall and tranny is way smoother again.Ive had three like this i got in recent deals.DON