RC10Talk - The Net's Largest Vintage R/C Community

In an effort to use what ever parts I had to build a VONATs entry and this is what I came up with.

RC10 Graphite chassis
RC10 Aluminum Nose plate
B44 rear axles
B44 shocks
B4 rear hubs
B44 Battery holder
Aluminum steering bellcrank (don't know the brand)

Waiting on:
RPM Front and Rear arms
RC10 Tie Rod set
RC10 Viper Body

looks good. make sure you improvise some kind of nose tubes or braces of some type. can be as simple as a couple of links tied into the steering servo mounts or something.

could use the gt brace tube supports too.

Yeah, I was thinking about that too, I have plenty of c-channel and 90deg. angled aluminum that I can do something with....

I could have used my aluminum gold tub, but didn't want to start hacking up an A stamp chassis....

Here are a couple of more pictures:

Mounted the rear motor protector and rpm bumper...

saddle packs! for shame. lol

I actually like the saddle packs. Using the B44 parts to secure them makes it look like they belong there.

Hey Pete,

The thing is, I wanted to use as much as I already had, so the saddle pack was the only other battery pack I had. I was going to drill into the chassis, but to my surprise the B44 battery cradles line up perfectly with the existing holes on the chassis...

I've only spent $60 on this project so far, not bad.

jwscab wrote:looks good. make sure you improvise some kind of nose tubes or braces of some type. can be as simple as a couple of links tied into the steering servo mounts or something.

could use the gt brace tube supports too.

The easiest thing is to grab some RC10gt nose tube mounts from ebay. The are blue and will even match the other blue stuff

gt nose tubes

Insane freddy.....Can't wait to see it run @ VONATS this year.

I thought the B44 battery cradle was 1 piece. It looks like yours is 2. Did you cut the center section out? I guess it could be a B44.1 battery cradle but where is the center piece that holds the packs apart?

Can't beat the price! See you in CT

ED

Yes, they're B44.1 cradles, the center piece would not fit in the center, the packs fit really snug in there, if anything I'll just use a battery foam in there....

I might go back to using a gold pan instead, for the rigidity factor...