Started with a decent pan and top loading shock bodies. Has rpm arms and steering. Replaced the bearings in the trans and installed bearings in the outdrives. The rims , trans, rear bulkhead , shock shafts, rear shock tower ,lower rear shock mounts and rear arm mounts are used. The rest is new from tower . I used a t3 servo mount bolts right in.
I've had this A-stamp runner for years.
It runs great, one of my favorite runners:
smooth 6-gear transmission
RPM arms all around
gold shocks with gold shafts and bleeder caps (0.71's up front)
World's type steering bellcranks
JC Racing wheels with...
Last post
I have run this one with an ounce of weight at the nose,
and the front shocks moved to the innermost upper mounting point (more horizontal).
It really handles nicely!
I am pleasantly surprised, as are others who see me running it.
Just picked this up over the weekend from Norman here on RC10talk. It's an A-stamp chassis drilled for a Stealth trans with white long arms up front and a World's bulkhead, and all original plastics except the rere World's steering. Here's the rest...
Last post
Sounds good Joey, lets try it!
I'll hold off on the 25 degree blocks for now then, I thought they would help it, not hurt it.
Starting my new-to-me early RC10 build. This car needs a lot more work than I anticipated, but then again maybe I should have expected this since I normally do this with full scale old cars and it's always the same story. I'm going to do this the...
Last post
It's been a while. My rc10 has been running along and bashing well. A lipo upgrade has made the car really fly. Love the new technology!
I picked up a total of three rc10 last week and am in the process of rebuilding them probably for resale however I want to keep one for my self. It looks like there is a lighter gold edinger and two darker gold a stamps. Is one more valuable than...
it's hard to believe i just noticed this now. maybe i did know and just forgot, or it's just matter of finding it because of using certain parts.........
A stamp
001.JPG
B stamp
002.JPG
see the difference? i'll have to be careful with the...
Got this from a good mate. It started life as a Ferrari on road racer. A Optima Mid Custom chassis that Kyosho slapped on a nice shell with the cool 5 spoke star chrome wheels. My mate converted it to...
Last post
Spent the last couple days on this now.
I installed a new digital servo, Brushless speedie with a 8.5 sensored motor.
The gearing is around the right mark. The platinum shocks aren't that good and too stiff . The rear springs are modded Losi...
will these work on the A stamp. I have the RPM rear arms and MIP cvd kit for the rc10 ( 1/4 axles).
Last post
steve thanks for the info . It was very helpful. I went with the 1.5 carriers. You really have to search the tower site for parts. With the rpm front and rear arms and the carriers and a few other parts i odered from tower I should have when...