RC10Talk - The Net's Largest Vintage R/C Community

SnoopMaxx wrote:Thanks
Plz post a link to your Barney beast

For that, you'll have to venture on over to the Kyosho section here.

Charlie don't surf wrote:Wow, cool thread!

Thanks Charlie
You got some cool builds too

I got the Losi XXX-SCB rollcage and body today, and I'm amazed by how close it is to my steel cage, when all I had was a few photos and measurements curtsey of Matt Sunderlage


I knew my cage was wider than the Losi cage, but it's very close in shape and length


Morten

The Losi cage is assembled



Morten

Bin messing with the Losi cage for my SRB buggy
I had allot of ppl asking it that cage would fit on the Rustler or Slash so I bought the cage to answer there questions ..And when I tried to order it from Horizon ...I GAVE UP trying to register ...Then I remembered Amain hobbies and in just under 5 min I had the parts ordered ...I tell you there's a big difference in online shops regarding how easy it is for a guy in Denmark trying to order from America

Testing with standard rear shock tower








Then I redesigned the rear shock tower to accept the rear part of the Losi cage
This could also be used on the standard tower, just cut it below the bottom cage mounting holes and bolt it to the rear of the standard tower








Next :
Mounting the Losi front bumper, Or can I use the `Pede bumper :O.o:





Oh Sorry for the long reply ...Have a great weekend

Morten

I'm digging your custom fabrication, Morten!

Thanks Mate
and happy Thanksgiving

Morten

I applied the paint mask and painted the base colour

Morten

Body is done




Morten

you lost me twice: when you tossed the metal frame you made so nicely and now again: I thought you were aiming to have it look like this?

HE HE Got you
I'm gonna do the lexan panels on the steel cage later on









Morten

Nice pinstriping: your own design? Decal or paint?

Thanks, The graphics are all paint
With a little help from a Parma Inca paint mask


Rear section are painted and mounted




Next I need to mount the front bumper and fab a rear bumper/bracket
and improve the steering with the Slash 4x4 bell crank

Morten

Well I was out testing my onboard camera (works great)
But I ripped the front wheel of at the hub ...........
The epoxy resin should be dry now


Trimmed and mounted


And I installed the Slash 4x4 steering



Morten

Happy holiday


Here's my On-board mini camera and carry bag






Morten