3D Printed a nifty shock stand. The holes are actually a bit large for the shocks, but it still helped keep them organized and upright for filling with oil.
Front Shocks on:
Rear Shocks on:
Battery tray in, wheels and tires on!
I couldn't stop there, so I threw all the electronics in temporarily:
Overhead view. Yes, I adjusted that Toe In!
I realized that I had put the front shocks in the Inner mount, so I moved them to the outer. Brought the front end down quite nicely!
I had picked up a set of RPM's nifty Toe In and Camber Gauges. Very handy and easy to use!
Next up will be properly mounting the electronics, and soldering in the ESC and Motor connections. Then, she'll be ready for some test runs!