RC10Talk - The Net's Largest Vintage R/C Community

Posted: **Fri Sep 25, 2009 6:26 am**

highwayracer wrote:I had the sliders on my blackfoot and I liked them better than the dog bones. And yes, they were a cust down version of the list sliders from the JRX series.

Moving forward, you can use the sliders from traxxas to replace those. The holes are slightly smaller...but that's a quick fix.

Regards,
highwayracer

Sorry to ask again, but can anyone provide a link to the traxxas sliders that are referenced above?

Posted: **Fri Sep 25, 2009 7:01 am**

http://www3.towerhobbies.com/cgi-bin/wti0001p?&I=LXJJ82&P=ML
or possibly
http://www3.towerhobbies.com/cgi-bin/wti0001p?&I=LXJK18&P=7

Posted: **Fri Sep 25, 2009 7:44 am**

Thanks! Looks like the second is a closer resemblance to the Thorp ones..

Posted: **Fri Sep 25, 2009 8:48 am**

CNA75 wrote:
rctenracer wrote:tried the frog axles. the dog bones that i have are not the same size.
I think I need thorp pin drive axles.
Can I suggest that you look in to trying these: http://cgi.ebay.co.uk/Tamiya-53908-FROG-WILD-ONE-Universal-CVD-Drive-Shafts_W0QQitemZ200350884757QQcmdZViewItemQQptZRadio_Control_Parts_Accessories?hash=item2ea5d7e395&_trksid=p4634.c0.m14.l1262

I have a set of these and they are the CVD hop-ups for the Frog. They are a drop-in solution so may well fit with your Truck. When I get back home tonight, I'll check whether they have the pins in the outer axles and let you know....

EDIT: sorry I should have pointed you in the direction of these ones made by CRP (which are the ones I actually have). The outer axles definitely have the pins so you can fit the Sees and they are a straight drop-in solution: http://cgi.ebay.com/AXLE-CONV-KIT-Tamiya-Blackfoot-Monster-Beetle-CRP-9130_W0QQitemZ230374244235QQcmdZViewItemQQptZRadio_Control_Parts_Accessories?hash=item35a35fff8b&_trksid=p3286.c0.m14

Posted: **Fri Sep 25, 2009 9:30 am**

CNA75 wrote: Can I suggest that you look in to trying these....

The issue is that the ball on the end of the thorp dog bone is larger than Tamiyas which means the drive cups are larger also. With no support from the ball, those CVAs will only be riding on the pin and will quickly wear out the slot on the thorp drive cup.

Posted: **Fri Sep 25, 2009 9:49 am**

looks like the crp kit is just some re-re frog parts with old school crp rear hubs.
for $35 you would probably be better off just buying the frog parts labeled as such but without the crp hubs for only $16:
http://cgi.ebay.com/NEW-TAMIYA-FROG-Axles-Rear-SUBARU-BRAT-BLACKFOOT-TF5_W0QQitemZ310165319497QQcmdZViewItemQQptZRadio_Control_Parts_Accessories?hash=item48374b2f49&_trksid=p3286.c0.m14

Posted: **Fri Sep 25, 2009 10:00 am**

aconsola wrote:looks like the crp kit is just some re-re frog parts with old school crp rear hubs.
for $35 you would probably be better off just buying the frog parts labeled as such but without the crp hubs for only $16:
http://cgi.ebay.com/NEW-TAMIYA-FROG-Axles-Rear-SUBARU-BRAT-BLACKFOOT-TF5_W0QQitemZ310165319497QQcmdZViewItemQQptZRadio_Control_Parts_Accessories?hash=item48374b2f49&_trksid=p3286.c0.m14

Good point. Although I don't think those outer axles have the pins for the Sees wheels.

shodog wrote:
CNA75 wrote: Can I suggest that you look in to trying these....
The issue is that the ball on the end of the thorp dog bone is larger than Tamiyas which means the drive cups are larger also. With no support from the ball, those CVAs will only be riding on the pin and will quickly wear out the slot on the thorp drive cup.

Would the solution be to replace the drive cups as well as the dog bones? Guess that would mean getting rid of the Thorp cups though....

Posted: **Fri Sep 25, 2009 11:13 am**

the frog CVD set does I just put them in my Frog and they have the drive pin for sure

Posted: **Fri Sep 25, 2009 11:24 am**

I have a set of sees wheels and they use the standard tamiya style cups. Do the newer axles have pins to hold the stock cups on like the older ones? I would think you could just pull the stock cups off and slide the wheels on.

Posted: **Fri Sep 25, 2009 11:29 am**

[email protected] wrote:I have a set of sees wheels and they use the standard tamiya style cups. Do the newer axles have pins to hold the stock cups on like the older ones? I would think you could just pull the stock cups off and slide the wheels on.

thats what I had to do on my midnight pumpkin. the CVD's have the pin and take the stock plastic hub.

Posted: **Fri Sep 25, 2009 11:36 am**

Whoa I was right? Gotta mark this day on the calender.

Posted: **Fri Sep 25, 2009 11:44 am**

The outdrives of the thorp have a hex mounting to the diff and are sized differently in length. There is now way to use the stock stuff with it.

Posted: **Sat Sep 26, 2009 2:15 pm**

CNA75 wrote:
Sorry to ask again, but can anyone provide a link to the traxxas sliders that are referenced above?

The ones that will work with the blackfoot are from the 4tec.

RC10Talk - The Net's Largest Vintage R/C Community

Blackfoot - Which Thorp Transmission?

Re: Blackfoot - Which Thorp Transmission?

Re: Blackfoot - Which Thorp Transmission?

Re: Blackfoot - Which Thorp Transmission?

Re: Blackfoot - Which Thorp Transmission?

Re: Blackfoot - Which Thorp Transmission?

Re: Blackfoot - Which Thorp Transmission?

Re: Blackfoot - Which Thorp Transmission?

Re: Blackfoot - Which Thorp Transmission?

Re: Blackfoot - Which Thorp Transmission?

Re: Blackfoot - Which Thorp Transmission?

Re: Blackfoot - Which Thorp Transmission?

Re: Blackfoot - Which Thorp Transmission?

Re: Blackfoot - Which Thorp Transmission?