I won some ebay parts..what exactly did I get? LOL

[y2kgtp]

i think they are Jrx2.....or jrxt?

[aconsola]

i think they are Jrx2.....or jrxt?

yes and no.
Some fit all the original cars, some are LXT specific

[bearrickster]

The single arm and body mount and top steering set are LX-T, the bulkheads w/arms look like Junior 2 or T, the H arms are Jrx pro-Junior 2,T, Battery Box all Jrx style cars.

[y2kgtp]

The single arm and body mount and top steering set are LX-T, the bulkheads w/arms look like Junior 2 or T, the H arms are Jrx pro-Junior 2,T, Battery Box all Jrx style cars.

Well, I guess I can use the battery box

Anyone need some parts?
Anything I can use for a Jrx2 or JRXT ?

[highwayracer]

Let's start from the top:

red bell cranks, short steering rack, castor blocks and steering block - LXT

next 2 sets of arms / bulkheads etc. are from a jrx 2. If the axles have a set screw in them (to hold the kingpin), then these would be from a jrx pro.

rear hubs (on the left) - jrx pro / jrx pro SE / junior 2 / LXT (anything with the h-arm set up)

red bell cranks, short steering rack & steering posts - If the hex at the bottom of the steering rack is about 1/8 of an inch tall, then this would be for the jrx pro. If the hex is about 1/4 of an inch tall, then this is for a jrx pro SE

battery cup - jrx pro / jrx pro SE / junior 2 / LXT

h-arms with rear hubs - jrx pro / jrx pro SE / junior 2

single front arm - LXT

front body mount - LXT

table - Staples model 4128 light oak laminate

Regards,
highwayracer

[y2kgtp]

Let's start from the top:

red bell cranks, short steering rack, castor blocks and steering block - LXT

next 2 sets of arms / bulkheads etc. are from a jrx 2. If the axles have a set screw in them (to hold the kingpin), then these would be from a jrx pro.

rear hubs (on the left) - jrx pro / jrx pro SE / junior 2 / LXT (anything with the h-arm set up)

red bell cranks, short steering rack & steering posts - If the hex at the bottom of the steering rack is about 1/8 of an inch tall, then this would be for the jrx pro. If the hex is about 1/4 of an inch tall, then this is for a jrx pro SE

battery cup - jrx pro / jrx pro SE / junior 2 / LXT

h-arms with rear hubs - jrx pro / jrx pro SE / junior 2

single front arm - LXT

front body mount - LXT

table - Staples model 4128 light oak laminate

Regards,
highwayracer

I don't think I will get the table in the package.....I have enough tables in my office as it is