** Build of the Month Contest - October 2023 ** - Winner - scr8p

[scr8p]

Open To Any Manufacturer!

OK, this will be the thread for the October 2023 Build of the Month Contest.

Refresh yourself with the rules before entering - http://www.rc10talk.com/viewtopic.php?f=98&t=35923

Please remember, no chit chat until all of the entries are locked in so they can stay grouped together.

GOOD LUCK!!!

************************************************************************

** Place Holders **

If you would like to enter the contest, create a post as a "place holder". DO NOT POST ANY PICS. You have until the 5th of the month to lock in a spot (10 entries max). You will then have 2 days to edit your post and attach the pics of your entry. The poll will be started on the night of the 7th. If you have not submitted your pics by then you will be removed from the contest.

[Frankentruck]

Comical Racer
Thorp 48 pitch gearbox
MiP CVD rear drive axles
Yokomo rear wheels and No Coast adapters
purple graphite front shock tower
bad @$$ front and rear Tamiya Super Gripper tires

build is here:
https://www.rc10talk.com/viewtopic.php?f=35&t=48561
.

.

[scr8p]

Masami 93 Worlds replica/tribute.

[romulus22]

[rctenracer]

2005 Top Force. Built from NIB kit. Had to replace the right rear axle as that part had come from the factory not threaded.

[Hemiclod]

Place holder

Jps Clodbuster, gearbox’s, wheels
Imex tires
Custom Proline body
Fantom 12x2
Superooster esc
Deans plugs
Hitec servo 645mg
Losi threaded shocks

[silvertriple]

I wanted to participate this contest for quite a while, but I wanted to do with something very unique...

Reproduction of a Marui MT60-RC09 Mitsubishi Jeep kit as presented in Marui RC 1986 catalog



It features :
- Enhanced chassis with more battery room, additional holes to ease cable management, shocks mods (relying on some mini CVA from Tamiya) and reinforcement
- Improved gearbox and new printed gears (strengthened compared to the original one, with a different module, a stainless steel idle gear and bearings on both ends of the idle shaft) with a brushless motor
- Rubber resin printed custom tires
- Custom printed bodyshell (and custom stickers courtesy of a friend)
- Leds on front, roll cage and rear

it's part of a multi build project, which included modeling of the chassis for Super Wheelies and Big Bear, re-building a Big Bear and a Super Wheelie CJ-7 Golden Eangle, and it required CAD models the Land Cruiser and the CJ-7 Golden Eagle bodyshells. The CAD model of the Mitsubishi Jeep and the build details are starting here : https://www.rc10talk.com/viewtopic.php?p=554076#p554076

[JackOTrades]

First time submission.

This is my vintage TMNT party wagon that was converted to RC with a custom designed/fabricated Tamiya TT-02 chassis.

The TT-02 chassis seemed like a good fit but it had to be shortened by 4”. I was able to squeeze everything onto the shortened chassis but had to move the steering servo to the left side of the vehicle. Even then, the steering bell ranks were hitting the end bell of the motor and needed a bit of dremel work. The custom bits of the chassis include the following:

- CNC machined upper and lower carbon fiber deck
- Machined aluminum prop shaft
- Custom designed and 3D printed body posts
- Custom designed and 3D printed wheels
- I also had to hack up the toy to fit over the chassis.

For the wheels. I found appropriate front and rear tires that were a close match to the original plastic toy wheels in diameter and width. I then had to design custom wheels that not only looked the part but also had the appropriate offset to set the correct track width (front and rear) when paired to the TT-02 chassis. With the design finished, I 3D printed the wheels.

I am quite happy with the end product it looks good and is fun to drive around.

Here are a couple of running videos

https://youtu.be/BoSSjhG4yWw?si=Tv522HYGX-CdVuG_

https://youtu.be/yMojzqWG6M4?si=qyMFsFAhG3XgrZN_

[Diamond Dave]

One spot left?

[Frankentruck]

Poll isn't up yet. Post it quick if you want in.

[limestang]

Amazing entries this month - Wow! Great work all!!!!
- limestang

[scr8p]

Poll is up guys. Good luck!

[Frankentruck]

Turtle Power!!!

[silvertriple]

Seems there is lot of those in comical spirit I'm not sure this represent the usual proportion...

[Chancentod]

Yokomo Works 91
Pavidis Replica (somewhat)
- Neovintage Chassis Set
- Fan Rc Middleshaft
- Apart of That original arms, shocks, diffs ...
ENJOY