Old School Rocket Car Build

The place for all things BoLink.

Moderators: scr8p, klavy69

User avatar
coxbros1
Approved Member
Posts: 2454
Joined: Mon Dec 24, 2018 8:50 am
Location: Energy, Illinois
Has thanked: 2654 times
Been thanked: 2310 times

Re: Old School Rocket Car Build

Post by coxbros1 »

Got the dual engine mount back in with dual "E" engines in it...7.5lbs of thrust each....2.5 sec burn....hoping for 100mph with these...two more "F" engines ordered for next week....hoping for 130mph from those....also put different front wheels on that shouldn't blow out....weighs 2.4lbs like this with body
20230428_160545.jpg
Tap pic for clarity: Derek

User avatar
THEYTOOKMYTHUMB
Super Member
Posts: 7070
Joined: Wed Oct 22, 2008 5:15 pm
Location: Evansville, IN
Has thanked: 3425 times
Been thanked: 1880 times

Re: Old School Rocket Car Build

Post by THEYTOOKMYTHUMB »

Looking at this makes me think you should probably pack a fire extinguisher just in case... :wink: :lol:
"The world looks so much better through beer goggles: Enjoy today, you never know what tomorrow may bring."
Ken

Dadio
Approved Member
Posts: 4054
Joined: Sun Apr 24, 2016 2:21 pm
Location: Guildford UK
Has thanked: 2697 times
Been thanked: 2234 times

Re: Old School Rocket Car Build

Post by Dadio »

Still getting my head around blowing out undriven tires just from the rpm .
If a jobs not worth doing then its certainly not worth doing well.
A problem shared is a problem halved but an advantage shared is no advantage at all.

User avatar
GoMachV
Approved Member
Posts: 12179
Joined: Sun Apr 29, 2012 10:31 pm
Location: Twin Falls, ID
Has thanked: 1079 times
Been thanked: 3726 times

Re: Old School Rocket Car Build

Post by GoMachV »

Dadio wrote: Fri Apr 28, 2023 5:58 pm Still getting my head around blowing out undriven tires just from the rpm .
This has been common in No Prep as well.

User avatar
coxbros1
Approved Member
Posts: 2454
Joined: Mon Dec 24, 2018 8:50 am
Location: Energy, Illinois
Has thanked: 2654 times
Been thanked: 2310 times

Re: Old School Rocket Car Build

Post by coxbros1 »

Dadio wrote: Fri Apr 28, 2023 5:58 pm Still getting my head around blowing out undriven tires just from the rpm .
It happened to the ProMod car when it was a nitro .18 too!...
The O-ring tires were super glued to the plastic wheel as well!...still blew!
Tap pic for clarity: Derek

User avatar
MarkyDents
Approved Member
Posts: 1183
Joined: Sun Jan 10, 2021 11:52 am
Location: Staten Island, N.Y.
Has thanked: 1783 times
Been thanked: 637 times

Re: Old School Rocket Car Build

Post by MarkyDents »

So awesome watching the shorts !! It’s got to be way too much fun lightin that candle :lol: 8)
Who do you race for ?
Me……. I race for me.
That’s impossible, I was told you need a sponsor to race.
Hey Cru ! Go balls out 8)

User avatar
coxbros1
Approved Member
Posts: 2454
Joined: Mon Dec 24, 2018 8:50 am
Location: Energy, Illinois
Has thanked: 2654 times
Been thanked: 2310 times

Re: Old School Rocket Car Build

Post by coxbros1 »

MarkyDents wrote: Fri Apr 28, 2023 8:13 pm So awesome watching the shorts !! It’s got to be way too much fun lightin that candle :lol: 8)
It's stupid fun!...we get up at 5am to run it...tomorrow....2 "E" engines!
Tap pic for clarity: Derek

User avatar
TheDiamondOne
Approved Member
Posts: 469
Joined: Fri Nov 12, 2010 2:26 pm
Location: Energy, IL
Has thanked: 1980 times
Been thanked: 547 times

Re: Old School Rocket Car Build

Post by TheDiamondOne »

Its pretty epic. I have only filmed so far but i will pilot that bitch!
David, The artist formerly known as coxbros

User avatar
RogueIV
Approved Member
Posts: 975
Joined: Sat Aug 27, 2022 10:04 pm
Location: W. Mass
Has thanked: 1875 times
Been thanked: 888 times

Re: Old School Rocket Car Build

Post by RogueIV »

coxbros1 wrote: Fri Apr 28, 2023 5:09 pm Got the dual engine mount back in with dual "E" engines in it...7.5lbs of thrust each....2.5 sec burn....hoping for 100mph with these...two more "F" engines ordered for next week....hoping for 130mph from those....also put different front wheels on that shouldn't blow out....weighs 2.4lbs like this with body

20230428_160545.jpg
A thought occurred to me. for the Dual setup you might want to do an over under setup instead of side by side that way if the timing is off it won't steer the car to the side.
Consistency is the key I keep misplacing.

User avatar
coxbros1
Approved Member
Posts: 2454
Joined: Mon Dec 24, 2018 8:50 am
Location: Energy, Illinois
Has thanked: 2654 times
Been thanked: 2310 times

Re: Old School Rocket Car Build

Post by coxbros1 »

RogueIV wrote: Fri Apr 28, 2023 9:59 pm
coxbros1 wrote: Fri Apr 28, 2023 5:09 pm Got the dual engine mount back in with dual "E" engines in it...7.5lbs of thrust each....2.5 sec burn....hoping for 100mph with these...two more "F" engines ordered for next week....hoping for 130mph from those....also put different front wheels on that shouldn't blow out....weighs 2.4lbs like this with body

20230428_160545.jpg
A thought occurred to me. for the Dual setup you might want to do an over under setup instead of side by side that way if the timing is off it won't steer the car to the side.
Best I can tell the timing of the engined is spot on...plus the consistency of Estes products!..made two runs...both ran exactly 72 mph...we will know for sure tho in the morning...also, I plan on putting the single mount on top of the duals..getting a much more streamline body.....going to go 3 engines eventually...130mph in 2.4 seconds....want to be the fastest in the world 🌎 at 132ft...even tho they wont let me compete with it
Tap pic for clarity: Derek

Dadio
Approved Member
Posts: 4054
Joined: Sun Apr 24, 2016 2:21 pm
Location: Guildford UK
Has thanked: 2697 times
Been thanked: 2234 times

Re: Old School Rocket Car Build

Post by Dadio »

coxbros1 wrote: Fri Apr 28, 2023 10:13 pm
RogueIV wrote: Fri Apr 28, 2023 9:59 pm
coxbros1 wrote: Fri Apr 28, 2023 5:09 pm Got the dual engine mount back in with dual "E" engines in it...7.5lbs of thrust each....2.5 sec burn....hoping for 100mph with these...two more "F" engines ordered for next week....hoping for 130mph from those....also put different front wheels on that shouldn't blow out....weighs 2.4lbs like this with body

20230428_160545.jpg
A thought occurred to me. for the Dual setup you might want to do an over under setup instead of side by side that way if the timing is off it won't steer the car to the side.
Best I can tell the timing of the engined is spot on...plus the consistency of Estes products!..made two runs...both ran exactly 72 mph...we will know for sure tho in the morning...also, I plan on putting the single mount on top of the duals..getting a much more streamline body.....going to go 3 engines eventually...130mph in 2.4 seconds....want to be the fastest in the world 🌎 at 132ft...even tho they wont let me compete with it
Yea but 132 feet or 132,000 feet altitude lol.
If a jobs not worth doing then its certainly not worth doing well.
A problem shared is a problem halved but an advantage shared is no advantage at all.

User avatar
coxbros1
Approved Member
Posts: 2454
Joined: Mon Dec 24, 2018 8:50 am
Location: Energy, Illinois
Has thanked: 2654 times
Been thanked: 2310 times

Re: Old School Rocket Car Build

Post by coxbros1 »

Had an igniter come apart....unless this old school train shop sells engine igniters, done till next week😔
Tap pic for clarity: Derek

User avatar
Frankentruck
Super Member
Posts: 3641
Joined: Fri Feb 19, 2021 9:59 am
Location: Texas, USA
Has thanked: 2477 times
Been thanked: 2779 times

Re: Old School Rocket Car Build

Post by Frankentruck »

Wile E. Coyote didn't need ignitors. And that always worked out well... 💥💥🐺💥💥
.
th(2).jpg
th(2).jpg (21.86 KiB) Viewed 801 times
th(2).jpg
th(2).jpg (21.86 KiB) Viewed 801 times
.
th(3).jpg
th(3).jpg (17.58 KiB) Viewed 801 times
th(3).jpg
th(3).jpg (17.58 KiB) Viewed 801 times
Frankensteined RC10T3 / Franky Jr RC10GT-e (x2) / A+ stamp / Toy Story RC / Graphite replica / B1.5 BFG 5LTi / Clonewald / Hyper Hornet

"I love the effort, but it sure looks like you took the long way around to a tub again"

BattleTrak
Approved Member
Posts: 716
Joined: Sun Oct 06, 2019 11:33 pm
Location: Ill-Noise, USA
Has thanked: 1105 times
Been thanked: 601 times

Re: Old School Rocket Car Build

Post by BattleTrak »

coxbros1 wrote: Sat Apr 29, 2023 7:35 am Had an igniter come apart....unless this old school train shop sells engine igniters, done till next week😔
Try Hobby Lobby..they have Estes stuff.
-Brad

User avatar
TheDiamondOne
Approved Member
Posts: 469
Joined: Fri Nov 12, 2010 2:26 pm
Location: Energy, IL
Has thanked: 1980 times
Been thanked: 547 times

Re: Old School Rocket Car Build

Post by TheDiamondOne »

Got some rockets from Hobby Lobby. Tested it twice. Video on rc10talk fb group. Thumbs will get it on here later. It crashed bad. Dual engines doesnt want to go strait at all so far. Dereks repairing it now. Will test again in morning.
David, The artist formerly known as coxbros

Create an account or sign in to join the discussion

You need to be a member in order to post a reply

Create an account

Not a member? register to join our community
Members can start their own topics & subscribe to topics
It’s free and only takes a minute

Register

Sign in

  • Similar Topics
    Replies
    Views
    Last post

Return to “BoLink Forum”

Who is online

Users browsing this forum: No registered users and 5 guests