Jrx2 vs jrxt chassis

[Wizemanne]

Had a jrx2 growing up and am looking to get a jrxt now.

How can you tell the difference between a jrx2 conversion to a jrxt vs an original jrxt chassis. I read that the angle for the jrx2 is 20 degrees vs 30 degrees for a jrxt in a previous forum. But how can you tell by looking at a picture? Is there something that gives it away.

Also from a collectors stand point how big of a deal is the jrxt chassis with the slot like the jrx pro vs. no slot for a jrxt.

Thanks

[coxbros1]

This is a restored jrx2 with a jrxt pro chassis with the hole...i filled it in

[Wizemanne]

Looks great, thanks for the pic.

[scr8p]

The chassis sides of a Pro / JRXT chassis are straight. They don't have that curve like the jrx2

[RC10resto]

JRX-T

[coxbros1]

The chassis sides of a Pro / JRXT chassis are straight. They don't have that curve like the jrx2

i curved that myself....used an original chassis as a template...used a die grinder with roloc surface disk to shape it. its all in my build thread.... this is the same chassis as above before i shaped and filled it

https://www.rc10talk.com/viewtopic.php?t=45684

[TheDiamondOne]

Derek really worked hard on that chassis and breathed in alot of graghite with no mask to make that chassis look like a jrx2. Please read his build thread.

[Wizemanne]

Thanks guys for that information. I learned a lot. And great work on that chassis