Not sure about the 10t but its usually leaky shocks , started with Tamiya rough riders probably , you see a lot of them with inverted shocks .
If a jobs not worth doing then its certainly not worth doing well.
A problem shared is a problem halved but an advantage shared is no advantage at all.
I was searching RC10s for my next build and noticed one with upside down shocks. This was a few weeks ago, and of course I cant find the pic now :roll: . I will keep looking til I find it again.
It would lower the center of gravity. Are there...
Last post
Just a solution for leaky shocks in the old days :mrgreen:
I'm looking for a bit of education, I think I might see the odd rolley eyes for this one :roll: :oops: Anyway how does the numbering work for shocks, is it related to the length, I thought 0.71 = fronts, 1.02 = mid length and 1.32s = rears :? I'm...
Last post
to this day i still get all mixed up on the frigging way ae labeled thier shocks.
I'm pleased I'm not the only one :? Thanks for the info chaps. :D
well since i cant sell my rc10 gold pan i guess i will put it back to a stock buggy. were can i find front and rear shocks for my gold pan? Will a b3 or b4 shocks work? i also need front shock tower and body with wing. and front and rear tires. if...
so, i'm hunting around on tower, and i start to look at the b44 front shock kit. i see that they use a .80 shock shaft, and you can buy it seperately from the kit. but, are the shock bodies .89's like the b4? there's no seprate part number for those.
best srb front shocks!
i was running the stock shocks on the front end / that worked well untill the front springs broke from wear points. i use the car alot with 18650 batteries....
i got the rcchannel front shocks but the springs are not great...
Hey guys, I have a question. I wish I had a picture, but I started taking it apart already. My friend bought a pile of RC10 cars and parts and I am trying to piece together a couple. The car I claimed as mine has a weird steering servo setup. I...
Last post
The geometry is good- better than stock, id put some better looking hardware on it and call it good.
x2 on that. \
I've had a few rc10t's over the years show up with this same kind of setup and thought it odd. Mostly these were all dismantled...
Hi i used a b4.1 rtr for the parts for my rc10 graphite team car.radio.brushless setup.servo.front and rear hubs.wheels front and rear.topshaft and slipper setup.rear wing and mounts for another car.so now before i sell whats left i was wondering...
Last post
I really dont know if it will or wont fit but I'll find out when all my stuff comes in. I was gonna post about what im running it on but i'll post when I start its build thread.