hi ,
this time to share with all .......are my MIP SP-2 Chain Drive RC10.
this are one of my favorite.......
now just hope have the chance to own the MIP cable version,that can complete my MIP 4x4 collection.
hope all enjoy the pics
sorry for I'm not a active member at here,cause of English not my mother language ......
That wheel and tire combo is a PERFECT match for that buggy. Are the fronts just same as the proline rears with a rib cut off? They suit the narrow arm so well.
harvey wrote:That wheel and tire combo is a PERFECT match for that buggy. Are the fronts just same as the proline rears with a rib cut off? They suit the narrow arm so well.
I bet they are the Proline wheels for the Kyosho and Tamiya 4wds..
Really nice car.
Regarding the MIP cable version, a friend of me was running that cable conversion at his RC10 back in the days. But this car has gone long ago.
Actually I just know of this conversion, was the cable the first one and how much 4WD versions were made by MIP overall?
hckyfntck wrote: ↑Sat Jul 25, 2020 10:33 am
Hi working on my own finally, missing chain drive support though any chance I’d find someone willing to 3D print one up?
Finding someone to print it shouldnt be an issue... but thats assuming you already have it designed.
Well....... I am hopeful (if not naive) that someone here has already crossed this hurdle and is will to share, or be compensated to have one scanned (original) and fab one up..
IF only technical drawing is needed and someone gave me the input measurement requirements(3D) I could in theory reduce the existing tech/ drawings to measurable amounts and we can give it a shot.
Example:
Height: = X
length: = Y
depth: = Z
thickness = A
Couldn't find any SP-2 instructions in the scans section so thought I would put some up, additionally I will do the SP-45 belt drive upgrade instruction in a 2nd post.
Last post
Out of curiosity do you happen to have the MIP cable drive 4x4 instructions? I've never seen a kit in person but remember pics of it way back when.
Does any one have a manual showing the assembly of the chain drive tranny for the RC10?
I picked one up off of E-bay, but it was apart. I think it is missing the top shaft. Could I use a stock top shaft?
Last post
Are you sure? My computer is fine. I will edit the link. Sorry if it did.
I THOUGHT THIS WAS AN INTERESTING ITEM, I HAVE NEVER HEARD OF THIS AFTERMARKET MOD...
I HAVE BOUGHT FROM THE SELLER IN THE PAST, AS HAVE A FEW OTHERS ON OUR SITE, A GOOD SELLER.
CHECK IT OUT!!
Last post
Surprisingly mine is very quite but it is running a hyperdrive belt system for the primary drive.I still have to swap the motor plate to the other side as pointed out by Highway racer in a previous thread as the belt drive system drives the spur the...
RC10 3/16 convert driveshafts are they still avaliable ??? I bought a new set here a long time a go and now when im assembled them one of them is binding i have tried to free it up but i guess its a monday copy.
Does anyone know if all of these old chain drive 1/10 4wd cars use the same chain. From what I have seen is that all of these chains that were used on Kyosho, AYK and others all look the same but were different lengths. Can anyone confirm if this is...
Last post
The optima originally had a lightweight chain and when the turbo optima was released it had a heavier duty chain which was available as a hop up for all optima series platforms that used chain for its drive, the pitch of the heavy duty chain was...
