XLS Rerelease

Post by **uzzi** » Mon Jan 01, 2018 9:04 pm

Hi Doug,

I am unaware of a smaller front pulley than the 50T from Schumacher....pretty sure that was for the spool set up as per the SW/XL CAT and besides any smaller pulley the belt will start to hit the front stabilizer bar....no? 51T is standard for the integrator and differential pulleys.

Cheers,
Chris

Post by **XLR8** » Mon Jan 01, 2018 9:41 pm

Okay, no problem. Thanks Chris.

Post by **Bigjam** » Fri Jan 05, 2018 9:33 pm

[/img]

uzzi wrote: ↑Fri Dec 29, 2017 1:52 am A1C23BB8-3BF2-4267-A565-F7DCD65EA54D.jpeg

My take on the 2017 XLS

Good taste!

Post by **XLR8** » Fri Jan 05, 2018 11:29 pm

Yeah, for a few seconds, I thought you had Chris' car. I guess great minds think alike?

Post by **uzzi** » Sat Jan 06, 2018 12:37 am

Hi Bigjam,

Very nice! Did you manage to sort out the pro transmission?

Cheers
Chris

Post by **slow_jun** » Wed Jan 17, 2018 6:40 pm

XLR8 wrote: ↑Fri Dec 29, 2017 3:30 pm
slow_jun wrote: ↑Thu Dec 28, 2017 10:06 pm encountered some issues with missing parts. but was able to finished while waiting for parts.

exceptional support from Schumacher, sent them by accident the wrong address for the items. was sent another replacement parts with out cost..
Looks very good. Sorry you had to test Schumacher's customer support but at least they came through for you. I emailed them about paint color recommendations but never received a reply. Can I ask what brand of red and yellow you used?

Oh thanks, let me see i think the yellow is brilliant orange(TS-56) and the Bright red (PS-34)....Edited.
Cheers

Post by **slow_jun** » Wed Jan 17, 2018 10:35 pm

XLR8 wrote: ↑Fri Dec 29, 2017 3:30 pm
slow_jun wrote: ↑Thu Dec 28, 2017 10:06 pm encountered some issues with missing parts. but was able to finished while waiting for parts.

exceptional support from Schumacher, sent them by accident the wrong address for the items. was sent another replacement parts with out cost..
Looks very good. Sorry you had to test Schumacher's customer support but at least they came through for you. I emailed them about paint color recommendations but never received a reply. Can I ask what brand of red and yellow you used?

response is quite slow mainly because of the time difference and maybe also due to the heavy flow of emails, but they will reply and follow thru. as for the colours i believe they will reply but will take some time.

I got the tranny upgrade kit and sent them a question regarding the top shaft bearing if it was included or not as the manual shows that it is but does not included in the parts lists. they replied but took some time.

Post by **slow_jun** » Wed Jan 17, 2018 10:36 pm

uzzi wrote: ↑Sat Dec 30, 2017 10:59 pm Just sharing some mods I have done for the CAT. I made some alloy spacers to replace the plastic ones for the suspension. I noticed that some of the CATs i had restored in the past the screws were bent. I assume this is through flex.....hopefully this mod would prevent this from happening.
I also made some stepped washers to centralized the spring and prevent it from wobbling about.

possible if you could share those pieces to those needy people

i want i want iwant.....

Post by **slow_jun** » Thu Jan 18, 2018 1:10 am

still haven't got time into the kit,

need to install these soon.

also noticed that in the tranny upgrade kit, manual will show 2 8x16x5 Bearings but this pair is not included as per support.

fyi

Post by **Retro rc** » Sat Feb 10, 2018 3:31 am

The 8x16x5 bearings are not supplied in the upgraded transmission as they are already included in the original kit. Why would you supply a second set

Post by **emmARRpee** » Mon Jul 16, 2018 10:56 pm

Hi Folks,

I am looking at building a 4WD re released kit like this and/or the Kyosho Optima.

I’m looking for some feedback one which one might be better to start with for a beginner?

I had always liked/wanted the Optima back in the day but hadn’t heard of Schumacher. The XLS looks pretty awesome.

Would one vs the other be better as far as getting parts?

Thanks,
Matt

Post by **GoMachV** » Mon Jul 16, 2018 11:48 pm

Having built both, I have to give the nod to Kyosho for ease of assembly and parts fitment. The instructions are well written.

Schumacher is a great kit as well, but (as with back in the day) it is a more complex kit and a bit more fragile as well.

Honestly you should just buy both. You will thank me.

Post by **Incredible_Serious** » Tue Jul 17, 2018 12:04 am

GoMachV wrote: ↑Mon Jul 16, 2018 11:48 pm Honestly you should just buy both. You will thank me.

That's a good way to get single real quick....

....

Post by **emmARRpee** » Tue Jul 17, 2018 1:30 am

That’s for the insights- I think I’m going to start with the Optima!

Post by **XLR8** » Tue Jul 17, 2018 12:37 pm

GoMachV is absolutely right, start with the Kyosho.
I have both in original vintage and re-release (Javelin) and the Schumacher is definitely for more experienced builders and racers.
Either way, 4WD buggies are a lot of fun. They offer a completely different driving experience from 2WD.

RC10Talk - The Net's Largest Vintage R/C Community

XLS Rerelease

Re: XLS Rerelease

Re: XLS Rerelease

Re: XLS Rerelease

Re: XLS Rerelease

Re: XLS Rerelease

Re: XLS Rerelease

Re: XLS Rerelease

Re: XLS Rerelease

Re: XLS Rerelease

Re: XLS Rerelease

Re: XLS Rerelease

Re: XLS Rerelease

Re: XLS Rerelease

Re: XLS Rerelease

Re: XLS Rerelease

Create an account or sign in to join the discussion

Create an account

Sign in

Who is online