Mostly Black RC10T.

[DaveM]

Hi,

You will also need 1 x ASC # 7381 CVD rebuild kit.

http://www3.towerhobbies.com/cgi-bin/wti0001p?&I=LX3276&P=7

Don't forget I haven't use these axles with the RPM hubs before, but I measured a pair of axles RC10th

had and it should work.

Broodenburg said it will work, I can let you know for sure when my parts turn up.

I don't know the part number for the shiny CVD bones, only the kit,

which is # 1197.

[DaveM]

Hi,

Team Associated are showing stock of the # 7379 bones.

https://www.teamassociated.com/parts/details/7379-ASC7379-mip_cvd_bone/

[Twistedaxle]

Looks good man!

[DaveM]

Thanks Mate!

Still waiting for parts!

[RC10th]

Bloody Postman!!

[DaveM]

That's for sure,

I felt sad today watching him ride past without stopping.

Looks like I have to wait till next week, hopefully Monday.

[DaveM]

My parts turned up

The B4/T4 axles worked with the RPM hubs with the addition of one #7368 shim per side,

http://www3.towerhobbies.com/cgi-bin/wti0001p?&I=LX2976&P=7

and using the Blue washers, 9608.

http://www3.towerhobbies.com/cgi-bin/wti0001p?&I=LXEAD3&P=7

But with the axles I received, the roll pin hole is loose, I had to put a crimp in the center of the roll pin,

using an old set of side cutters, to get them to work.

I checked the B4 and T4 manuals, I have the correct roll pin # 7369.

https://www.teamassociated.com/pdf/cars_and_trucks/RC10B4/drawing_b4.pdf

https://www.teamassociated.com/pdf/cars_and_trucks/RC10T4/Factory_Team/drawing_ftt4.pdf

I just sent Team Associated an E-mail.

[DaveM]

Hi Guys,

Latest pics,

[RC10th]

Looking good Dave.

[DaveM]

Thanks RJ,

I put the blue Team nose tubes on, I didn't think I would like them.

But with the blue springs it looks great.

Need to take a pic.

[Twistedaxle]

That looks fantastic man! What did you have in mind for a body?

[DaveM]

Hi Mate,

I am not sure, this is where things will slow down,

I wanted to use a Team body, but I only have an early body from TBG.

Here are some more pics,

[firebird1999us]

Nice!!!

[DaveM]

Cheers, Thanks Mate.

Tower Hobbies sent me an E-mail that the back ordered 10T/T2/T3/GT CVD Bones were in stock.

They are in limited numbers though, I was able to get 2.

[firebird1999us]

Cheers, Thanks Mate.

Tower Hobbies sent me an E-mail that the back ordered 10T/T2/T3/GT CVD Bones were in stock.

They are in limited numbers though, I was able to get 2.

Whats the item number for them through tower? Also 2 other questions - what bolts did you use to attach the shocks to the shock tower? What's the official number on those wheels an do they make a flourescent yellow equivalent?

Truck looks fantastic!