WHAT Is Wanted?

[toyranosaur]

MmmKay, so! I knew it would happen eventually, I'm gettin' stretched for part ideas. Ergo and to wit, I'll be looking for sompin' you chaps have long wanted but not seen!

When I did the jellybean wheels, it got all crazy: It was obvious that there were 2,413 different front/rear/drive/offset combos wanted for specific cars through the years, and that just ain't not possible for me to do! So I'm lookin' for some consistency with less variables. Speak up, and chat amongst yourselves- It could lead to a nice product soon if it meets my basic criteria!

It don't even gotta be an RC10 part- Anything goes! Cheers All, Chris REC

[RC104ever]

Off the top of my head:

1. Something for the Hotshot. Maybe shocks, wheels, or an undertray and battery holder (like the Supershot)
2. Maybe a polished RC10 chassis
3. RC10 alloy shock towers
4. Sand Scorcher Independent Rear Suspension setup (I know there is one out there but you'd probably make it better!)
5. Sand Scorcher shocks that are better than stock
6. Alloy Brush guard for the Sand Scorcher and RC10T
7. Alloy gear covers for RC10

[Westcoast10z]

These, but aluminum. Would buy, yes. As a set with boxart spring clamps, double yes.
Aplolgies to Bigjeepz who I think took the pic.

images.jpg (9.26 KiB) Viewed 3835 times

images.jpg (9.26 KiB) Viewed 3835 times

[shodog]

I'd go with a rerelease of some of your proven sellers. With the release of the rc4wd blazer body there could be a demand for your warn and Chevy 8 bolt nuts



I Especially want you make the the Classic unflanged



I wish you would rere parts from your scorcher baja kits like the chassis, motor and gear covers along with the trim bits.













As for something new I'd like to see more SRB parts. Air filters, Oil cooler and remote oil filter mount

[Supernaut]

Tamiya Egress parts would be cool....

[limestang]

Id love to see a cool motor display stand.

Also another custom gear cover like the tamiya one but for rc10.

[RC104ever]

What about a nice SRB alloy motor?

[Bong024]

Id love to see a cool motor display stand.

Also another custom gear cover like the tamiya one but for rc10.

A gear cover would be cool, I've never seen that one done.

[dsmith]

something similar to these ...aluminum?..i def would buy a set...everybody and their brother would want these for their sc10,ect...

f11.jpg (22.25 KiB) Viewed 3730 times

f11.jpg (22.25 KiB) Viewed 3730 times

[shodog]

something similar to these ...aluminum?..i def would buy a set...everybody and their brother would want these for their sc10,ect...

f11.jpg

I'm not so sure. these have been on closeout at RC4wd for years http://store.rc4wd.com/Outlaw-Associated-SC10-Billet-Alum-Wheels_p_890.html

[dsmith]

something similar to these ...aluminum?..i def would buy a set...everybody and their brother would want these for their sc10,ect...

f11.jpg

I'm not so sure. these have been on closeout at RC4wd for years http://store.rc4wd.com/Outlaw-Associated-SC10-Billet-Alum-Wheels_p_890.html

yeah...but....those are bearing and pin..no one uses them anymore....these are 12mm hex.....plus...those are lame lookin....but..your prob right....some Subaru brat or scorcher stuff is always cool....

[toyranosaur]

Hey! I'm gettin' some good idears from you chaps! Westcoast10z, I need to know what those are & what car they're for, then I'll see. Shodog, I get the idea you want flageless nuts! (I did kinda burn ya cancelling Nutpocalypse 2016. ) Funny, I been checking out an SRB oil cooler for a long time: Hmmmm?

Fill me in Gents, what RC10 Alloy towers are wanted? Pics & part #'s would also hep' me out there. The RC10 gear cover looks interesting! You want it 'peek-A-Boo' like the SS cover Shodog showed or solid/engraved?

I'd really think about SC10 Alloy wheels, so ther are NONE out there now that use the hex? I'm stuck in my little hole here & don't really know what's not out there that should be- Hence the clever title of this thread. Keep it comin' Mates,. the louder you are (And the more info/bckground/pics you submit to lessen my Googling stuff all day) the better chance of stuff getting done! Diggin' it!

Honestly, the Jellybean RC10 wheels I did were my all-time highest-grossing product in 1 single run, so I came here to ask. Chris REC

[Westcoast10z]

Those are for RC10 (photo credit Slotcarrod)

[limestang]

Chris, I vote for the see thru rc10 gear cover. Your tamiya one is my all time favorite, but I didnt know about you when you produced it. So looking forward to one I can get:)

Thanks Mark/Limestang

Hey! I'm gettin' some good idears from you chaps! Westcoast10z, I need to know what those are & what car they're for, then I'll see. Shodog, I get the idea you want flageless nuts! (I did kinda burn ya cancelling Nutpocalypse 2016. ) Funny, I been checking out an SRB oil cooler for a long time: Hmmmm?

Fill me in Gents, what RC10 Alloy towers are wanted? Pics & part #'s would also hep' me out there. The RC10 gear cover looks interesting! You want it 'peek-A-Boo' like the SS cover Shodog showed or solid/engraved?

I'd really think about SC10 Alloy wheels, so ther are NONE out there now that use the hex? I'm stuck in my little hole here & don't really know what's not out there that should be- Hence the clever title of this thread. Keep it comin' Mates,. the louder you are (And the more info/bckground/pics you submit to lessen my Googling stuff all day) the better chance of stuff getting done! Diggin' it!

Honestly, the Jellybean RC10 wheels I did were my all-time highest-grossing product in 1 single run, so I came here to ask. Chris REC

[toyranosaur]

Ah! Thanks Westcoast! Those do make sense, any shock that lets the spring move about is not good. If you mean the regular white shock clamps, sure, thos are doable. I've never liked most alloy clamps as they don't use a small enough radius to transition from the body to the flanges, which makes 'em look clunky & heavy- I'd fix that were I to do some. Gents? Opinions?

Stang, I've always really liked the see-through covers too- Lets you put extra stickers on your spur for more coolness. These would both be fun projects, but they gotta turn a profit also-This means a few at a high price or more for cheaper, so afte this thread has run a small while, I'll post with a voting thing or such to choose the bestest part(s), fair enough? Speak up gents! I know this is a tester thread, but if it's allowed to put it where more chaps could see it within the decorum of the forum (I'm a poet!) that would make a bug difference. Admins, any thoughts? Chris REC