So what did you get in the post today ???

[R Cane]

worf.jpg (21.63 KiB) Viewed 1172 times

worf.jpg (21.63 KiB) Viewed 1172 times

[DaveM]

Hi Guys,

I bought a new charger this one also has a storage setting for Lipos, and 3 Turnigy 4000mAh Lipos.

Cheers, Dave.

[Coelacanth]

Hi Guys,

I bought a new charger this one also has a storage setting for Lipos, and 3 Turnigy 4000mAh Lipos.

Cheers, Dave.

I have the previous version of that unit, the B6AC. Be careful with the chrome push-buttons; I had one of mine somehow push too deep and fell inside the case. I had to disassemble it and figure out a way to re-attach all 4 buttons so they wouldn't do that anymore. It works fine now, though.

[GoMachV]

Traded some work for a 12e and noticed something weird with the speed control lmfao

[RC10resto]

I like the Aircraft 72 Band receiver

[Jirka]

Traded some work for a 12e and noticed something weird with the speed control lmfao

Ain't that partially Tamiya mechanical speed controller connected to some resistor . It might even work

Jirka

[limestang]

Hey Slotcarrod - I found the matching driver's for your new ride. Was the seller's name Sid by any chance:)

[Incredible_Serious]

I got two eBay lots.... of varying quality

First lot was a bunch on NIP HB Cyclone chassis parts, which will be great for my Cyclone resto, as well as a full set of Tamiya Mini plastic oil shocks.

Second was possibly the grimiest SC10 you've ever seen.... there's mud and dirt everywhere, and there's even a little bit of lexan bodyshell holding the gaffer tape together . Picked up because it came with a bunch of extra gear, including two sets of 2.4 radio, two brushless motors, three brushless ESCs, and a couple of strong-looking servos. I'm guessing I'm not going to get much from the various ESCs, though, judging by the "who let the smoke out" smell wafting about the box....

Alex

[aip47-2008]

[slotcarrod]

Hey Slotcarrod - I found the matching driver's for your new ride. Was the seller's name Sid by any chance:)

No no not mine, j-sou was the lucky winner of that one! Fitting drivers though!

[romulus22]

Second was possibly the grimiest SC10 you've ever seen.... there's mud and dirt everywhere, and there's even a little bit of lexan bodyshell holding the gaffer tape together . Picked up because it came with a bunch of extra gear, including two sets of 2.4 radio, two brushless motors, three brushless ESCs, and a couple of strong-looking servos. I'm guessing I'm not going to get much from the various ESCs, though, judging by the "who let the smoke out" smell wafting about the box....

SC10.JPG

Alex

That looks like exactly like my old sc10 and just how I sold it. But that was years ago and it had a velineon setup bolted in it.

[GoMachV]

'bout time! This is my real cnc router. My temp has served me well but this one will make a lot of dust a whole lot faster

[fakiee]

Looking for a YZ10 front bulkhead on Google, I stumbled upon this instead

Chassis sure looks like Fibre-Lyte, but nothing they show. Kit was missing original body, chassis, shocks & tires.

I think I have two of those chassis, got a couple from Germany. Did you have the long battery plate a well?

[aip47-2008]

[fakiee]

Looking for a YZ10 front bulkhead on Google, I stumbled upon this instead

Chassis sure looks like Fibre-Lyte, but nothing they show. Kit was missing original body, chassis, shocks & tires.

I think I have two of those chassis, got a couple from Germany. Did you have the long battery plate a well?

Yep Body and everything pictured came from Germany. No long battery plate though, just the standard 94 kit battery straps.

Just dug out my old post re the chassis; http://www.rc10talk.com/viewtopic.php?f=29&t=20795