Latest make over..
Inverted the steering servo. Life 6.6v 1100 ma receiver pack uses the old tank mounting bracket beneath receiver.
5, 35mm spacers used. Throttle and brake servo mounted on top deck.
2.2 wheels and a 18 toothbell equals one fast stinger.
Nice job on cleaning up this buggy! I am also impressed with the routing of the return line from the top of the fuel tank to the exhaust. You could have ran it straight across in between the servo and rx though.
It's time to stand up to the bully. Support the companies that support the industry, not the ones that tear it down. Say no to Traxxas Factory Works website
If anyone has one of these, I need some deminsions from them. There is a set for sale, but Im wondering if they are all the same, or if they have seperate Front and Rear designations, and if the Off-Set will work for what I want them for.
Can...
Last post
Measuring up the wide tamiya wheel:
width = 1.25
diameter at bead = 1.9
backspace = .59 (assembled with negative offset)
1.25 - .59 = .66 (distance from hex surface to outer wheel lip on tamiya wheel)
I was tangling around with other cars and not getting where I wanted last thursday night.
Then the Stinger caught my eye. It had been sitting in a corner for a while and didn't get much attention sofar.
I decided it would take my mind of the others...
Last post
With the original tires the body looks huge, I would prefer 1/8th tires or maybe some tall2.0 crawler tires... but I had these tires already and no other purpose for them... so weighing up econmy against looks this sis the best outcome for now.
For a good while I've been interested in a Stinger Mk1 buggy. The asthmatics really do it for me.
So, I'm interested in getting one of these cars and handing the radio to my eldest son and letting him enjoy a low powered nitro off roader at a local...
Last post
It's a shiny plastic plate, looks like the shiny side of kydex
My work bench has seen some action this weekend. I decided to pull the last of my two Gallop Mk2 buggies out for another look.
A while back I spent a good while searching and chasing down parts and cars to add a Gallop or two to my collection. Many...
Last post
Fantastic job Jason - not an easy shell to mask, and with all the colours it gets complicated to say the least !
IIRC, the Kyosho Outrage MK2 came out in 1993/1994. Would someone with an Tower Hobbies catalog check if I'm right and also was it a kit or RTR. While your in there, what was Tower's price?
Last post
Anyone? Even an issue of RCCA?
I'll have a look tonight, although I'm pretty sure the ads I saw it in are from later...
Hello all!
Im doing a restoration of an Gallop MK2 and need 2 front dogbones and 2 rear dogbones. Can someone please tell me the length of the fronts and rears?
Regards Patrik
Last post
Do you still need this info? I have the manual and some I can measure?
For some time I have had a want for a really nice Gallop Mk2 buggy. The box art design of this car really sparks my interest and I have been on the hunt for cars and parts for some time.
Finaly I got a break when I won an original Gallop on eBay...
Just bought the Kyosho Fazer Mk2 Apine 1/10 car. It’s my first ever electric car. I really dont have any idea on what battery and charger i should use. I don’t mind about price. I just want something withthe correct spect for the car. Any help...
Last post
Wow. Thanks for all your help. Thats what i needed. I tried to reach my local Hobby Shop for answers so i can buy from them with no luck. So i probably gonna end up buying online.
Happy to help. :D
Thank you for trying to reach out to your local...