NIX91 Questions and Answers

Post by **m_vice** » Sun Sep 21, 2014 5:43 pm

Great moment for me to decide to pop up and take a look at the Talk. This is amazing guys, great job.

Post by **slow_jun** » Sun Sep 21, 2014 8:25 pm

Seabass wrote:Unfortunately I do not have a "racer kit" so to speak. I sure wish I could accommodate everyone but it is just not feasible since I am doing all the kit work by myself and time is not exactly on my side since I also have a normal day job as well.

The race parts will follow shortly since I am finishing up the final kits now.

Jake

No problem Jake, Thanks a lot for taking the time to do this Kit for everyone to have .

Post by **tiger1** » Mon Sep 22, 2014 4:51 am

Hi:

What was the meaning of (on the other URL http://www.rc10talk.com/viewtopic.php?f=99&t=36418 ): "CNCRC-004 - Aluminum Chassis Stand Off (4pcs) (Non-tapered)"

Non-tapered? Non-tapped?? Or it meant the posts are straight sided??

Please advise.

Thanks in advance

Post by **Seabass** » Mon Sep 22, 2014 10:14 am

The stand off are tapped 4-40 top and bottom. The standoffs do not have a taper machined into them meaning they are straight sided. The original car had tapered chassis standoffs which can easily be done in a lathe. I did not do the machine work on the taper simply because if the time it takes and the quantity I needed.

Jake

Post by **tiger1** » Mon Sep 22, 2014 10:29 am

thanks Seabass

Post by **Seabass** » Tue Sep 23, 2014 11:14 pm

Guys I ordered enough small pattern nuts to include in every kit to correct the minor issue we identified with the SLS steering bell cranks.

Jake

Post by **tiger1** » Wed Sep 24, 2014 8:29 am

Seabass: you could be my son-in-law!!!

Post by **slotcarrod** » Wed Sep 24, 2014 8:41 am

tiger1 wrote:Seabass: you could be my son-in-law!!!

Hmmmm? Another South East fling?

I would send pics of her to Jake now!

Post by **Seabass** » Wed Sep 24, 2014 9:52 am

Rod you are hilarious....

Post by **askbob** » Wed Sep 24, 2014 11:59 am

Post by **Mark Westerfield** » Wed Sep 24, 2014 8:03 pm

Since the original had 30 degrees of chassis kickup, will there be a 2nd chassis and bulkhead for the Nix91 with 30 degree in the future?

And will I get a nice Nixconcepts stickers to run on my car with my parts and chassis kit?

Post by **badhoopty** » Wed Sep 24, 2014 8:31 pm

wow... what a nice thing to come back to the board after another leave of absence. this is rad.

Post by **Seabass** » Wed Sep 24, 2014 9:43 pm

Undecided on the other chassis and bulkhead right now, it is a possibility.

Jake

Post by **JPAE07** » Thu Sep 25, 2014 2:41 am

badhoopty wrote:wow... what a nice thing to come back to the board after another leave of absence. this is rad.

X 2

Post by **Niki** » Thu Sep 25, 2014 3:31 am

Mark Westerfield wrote:And will I get a nice Nixconcepts stickers to run on my car with my parts and chassis kit?

Sorry, I can offer only DIY version of my pancar project stickers...
https://dl.dropboxusercontent.com/u/31381524/NIXconcepts_NIX10LC_600dpi_A4.jpg

RC10Talk - The Net's Largest Vintage R/C Community

NIX91 Questions and Answers

Re: NIX91 Questions and Answers

Re: NIX91 Questions and Answers

Re: NIX91 Questions and Answers

Re: NIX91 Questions and Answers

Re: NIX91 Questions and Answers

Re: NIX91 Questions and Answers

Re: NIX91 Questions and Answers

Re: NIX91 Questions and Answers

Re: NIX91 Questions and Answers

Re: NIX91 Questions and Answers

Re: NIX91 Questions and Answers

Re: NIX91 Questions and Answers

Re: NIX91 Questions and Answers

Re: NIX91 Questions and Answers

Re: NIX91 Questions and Answers

Create an account or sign in to join the discussion

Create an account

Sign in

Who is online