My Andys R/C10 build up

[scr8p]

looks like there's a crack on the other side.

edit: just noticed the extra scews so that should help.

[integra22t]

thanks ill have a better look at the other side .. didnt notce anything while it was off .. might be dirt

[scr8p]

might not see it if there's no screw in it.

[integra22t]

damn it your right ... ill add a little to that side as well .. i need better eyes

[integra22t]

well got out to the wall ride today and didnt finish a heat .. kept braking parts .. first was the rear a arm carrers then the next race i killed a front caster block and she was done as i didnt have a spair one

but i did lead the first lap

this is what the track looks like

http://s114.photobucket.com/user/integra_album/media/rc%20nitro%20truck/103_1896_zps5190394f.mp4.html

[integra22t]

havent done much with the car till i find some more andys parts then ill get around to installing the hydra drive ... but till then i installed the teflon shocks

[integra22t]

playing around with a light box i made up

[integra22t]

so now with me picking up a rc10b4 i retired the rc10 .. i will still have it working incase i want to take it for a spin

i picked up some more parts and felt like building something over the weekend so i got down to it



all the andys parts ive been collecting and finaly installing the hydra drive

so i replaced the cracked front bulkhead and installed the copy front shock tower till i can get the real one and installed the .71 front shocks with 30wt oil and green springs

after i got it back together i tore into the rear and preped the hydra drive for install.. good thing i still had a bottle of hyda drive fluid in the tool box lol





i forgot the size difference



and finaly installed

[jwscab]

Love the paint on that rc10!