RC12LS standoff question

[V12]

For completing a RC12LS project I need to know the length of some standoffs. These are the ones used for chassis brace and dampener assembly. Manual tells part# but not length.
I have some standoffs laying here without bag so don´t know if could be used or not.
Thanks

[Wazza22]

Hey V12,

I have some at home, Ill check when I get home from work and let you know.

Cheers

[Niki]

Found in my notes...
#4440 (29.2mm)
#4441 (12.6mm)
#4442 (19.8mm)

[Wazza22]

Hi V12

Posts are as follows;

Two outer posts are 19.8mm
Centre post under brace is 12.6mm
Centre post above brace for damper springs and discs is 29.2mm

I hope that helps


Cheers

[V12]

Thanks guys, that helps a lot.