So here she is all freshen up! Besides new turnbuckles and a nut here and there, everything was recycled Just needs a nice shell... Still undecided about the wheels so I used the min mags that were previously on my sprint car for the picture. I am considering black dyed stock rear ones and Proline gold fronts.
_____________________________________________
_____________________________________________
Come and visit the stable
Looks great David The MRP rears that were on it were very very popular @ RCHR where that car was run- and the AE late model would look stellar on it! Rear body mount in-route too
Charlie don't surf wrote:Looks great David The MRP rears that were on it were very very popular @ RCHR where that car was run- and the AE late model would look stellar on it! Rear body mount in-route too
Rear body mount arrived thanks again Reg! The rear MRP were shot dead and cracked unfortunately. I have no AE late model body and i'm not even sure it would fit over the left pod of the custom tub, especially at the front. I found this body back recently and simply fit it over for a try. Body mounts would need to be entirely repositioned if I go for this. What do you guys think? I have the same Shelby Cobra body unpainted and untrimmed in storage.
_____________________________________________
_____________________________________________
Come and visit the stable
I forgot I never posted photos of this car I grabbed about 6 months ago off of eBay. I got it for the chassis and the gearbox (MIP), but to this point, I've kept it as I originally got it. Neat car, and brings back a lot of memories of how they were...
Last post
The flat format is what I have on my Big Boys car and it runs VERY true on carpet - you can place it anywhere and it hauls - now I just have to get my Trackmaster belt drive in tip-top and I will be all set. :D
i just bought a rc10 buggy converted to dirt oval that i will be running at a local track. my question is were can i buy parts and hopups? (havent got the car yet) just doing what i can wile wating on it to arrive.
Last post
GOOD Morning . On the tires I am useing Buggy silver pins. I am not sure on every body elest is using for there were trucks that night. I am also useing the stelth tranny in the buggy not the 6 gear. Was also useing the black springs. with the stock...
I just pulled my old DO car out to run this winter on my local carpet track and want to update my wheels/tires. I want to run CW or TM 2.0 foams but I'm not 100% sure what I need to convert it. I already have a set of 3/16 MIP CVD's so I think I...
Last post
I know this is an old thread but could somebody shed some light on what front axle to use to run those pan car front wheels I just built a sprint car and have a bunch of those old wheels that I want to use but the axles aren't long enough to use...
okay, recently picked up this aluminum rear bulkhead that is obviously for an RC10 based D.O. car, most likely a terminator based car maybe? very nice machine work! shock mounts are built in (3 holes across top on either side) and it was designed...
Last post
yeah, I got it off DODC for 5 bones to my door, thought I couldn't go wrong. I could tell by the pic it wasn't an R&D or an early kranzels, but upon getting it the machining is really Really nice. I'm not familiar with Wollfe stuff, but I'll take...
Well, i have some Andy's parts and want to know what all came w/ the conversion, and if someone has a pic of individual oarts, post them up :!: :!: :P
Last post
Well, i got some parts in a RC10T trade and i asked someone and they said it was from Andy's, if thats all the parts, i have them all except for the rear hubs!!!!!!!! :mrgreen: :mrgreen: I just need to know for when i either sell them or make an...
I finally found a new body for my old oval car and it has sparked my interest again, my car is quite unusual. RC10 based dirt oval cars vary wildly and tend to be scattered on the board so why not start a picture thread of different cars, ideas and...
Last post
Came across this guy. Is this a McAllister conversion?
Also has quite a few Andy's parts as well.
I've been wanting to build a replica of this car for quite some time, but I can't find any info or pics of the details like electronics, etc. Does anyone know anything about the car that was featured in the 6-Gear Graphite ads in '89-'90? When and...
Last post
Sorry about the hijack, but winrar at rarlabs.org is free alternative to both winzip and 7z