Very hard to find. I will keep my eye out, I have seen them before. BTW, that is the same body that I used to use on my RC10 back in the day. I have video of it around here somewhere.
that was an easy one............Try emailing or giving Hobbysports in Portage, Michigan a call (they are on ebay under the same name). They were the last to have them when I saw them. They are about 2 hours from me...... If they have a couple, get me one please sir.
scr8p wrote:so, you could buy the car, like that, and just add your own trans?
Yeah, that was a pretty common thing back then. I bought my Schumacher Cat XL from a local hobby shop that had built up a kit with a TRC graphite chassis, Trinity diffs and belts, custom body and wing, and a few other parts to make a special edition kit. When you got the kit, it was basically a box with all of the aftermarket parts, still in the original bags. They just put everything together for you.
mrlexan wrote:that was an easy one............Try emailing or giving Hobbysports in Portage, Michigan a call (they are on ebay under the same name). They were the last to have them when I saw them. They are about 2 hours from me...... If they have a couple, get me one please sir.
Thanks Jay, I'll give them a call tomorrow at the office.
mrlexan wrote:that was an easy one............Try emailing or giving Hobbysports in Portage, Michigan a call (they are on ebay under the same name). They were the last to have them when I saw them. They are about 2 hours from me...... If they have a couple, get me one please sir.
Just got off of the phone with them, and unfortunately, they didn't have any in stock—even in the closeout bin. I'm still looking...
Time to ressurrect this thread. Doug, I have a single seater body for you if you want it. The only bad thing is that it is poorly cut and has a hole in the side pod. I figured I would offer it up to see if you can do anything with it. Worst case, if you don't want it, I will keep it to see if I can make a repo mold from it. I can post a pic if you like. Lemme know.
Picture 071.jpg Picture 070.jpg Picture 072.jpg Picture 073.jpg
This is my Gold pan runner, got in from fee-bay this spring along with another one a few weeks later. I took both of them apart and put the best parts into this one, now I'm looking...
Last post
there is a thread with all the info you'll need about running modern rubber on this buggy here:
a lot of good info in here also:
the second one is mostly for those builds allready set up but it has alot of links to their builds and alot of...
Hi fellas, I recently purchased a lot of good deals on RC10s thru Ebay. I had really good luck finding mint stuff at reasonable prices. In the aftermath of all the extra parts I ended up with plus some extra used chassis I had from my previous...
Last post
Hmmmm
I have an old Tamiya Monster Beetle body at home. Perhaps i should try to build one of these fo playing around..
My new project. I just picked-up this small lot over the weekend , it was listed for $50 on Craiglist. The buggy is in pretty good shape and just needs a good cleaning. Looks like the off-road tires were not used , also came with a wing and I...
Last post
Sway bar problem fixed with a paper clip , just have to order a body from Tower to finish the build. Time to put the foams and bumper back on and take a spin :D
I can't believe how much fun it is to revisit the past with working on these vintage projects. This is my more recent score and I wanted to make it a little modern and keep it unique to me.
Here it is before I touched it....
RC10 3a.jpg
RC10...
Last post
hi there! look really nice!!!!!
please can you show me how do you install the rear wing, and what wing mount are you using.
thanks in advance.
I got the idea from another member on this forum. Essentially, I am using standard RC10B4.1 wing...
I recently picked this up from a FB post after wanting a 10T since the 90's. Plan is to go through it and get it running on modern electronics.
z_IMG_3343.png z_IMG_3344.png z_IMG_3348.png
It looks like an RTR to me that someone has been...
Last post
front bumper looks rpm sc10t-ish...or traxxas rpm slash. picture really isn't good enough for me to see it straight on so its guessing.
Picked up this lightly used b2 roller that I tore down cleaned up and added new front tower and new rear tires and bearings to the steering. I will replace some other parts as I go as well as some of the hardware.
Last post
That LRP is sweet. I'd love to find one someday. Novak Hammers seem hard to find now as well.
this is my project im on building iv cut the chassis down drilled it and painted it im gona put 2 bars down the middle for strength. parts on order b44 cv's rpm gt rear hubs and toe in blocks rpm front carriers not to sure about the...
Last post
Hey, looking real good! I bet thats going to be capable of kicking some serious B4 Ass 8)