marlo wrote:I require the one on the left, hard to find, but I hope it never get's a re-re......
years ago there was an ebay auction with like, 4 or maybe even 5 of them. iirc me, mrlex, and scr8p went in on it and each got one.
I remember last year one was on E-bay, mixed in with some other parts. I'm sure that everything was nip. or new, the bids went up! I'm not sure who was the seller, although I have bought from them before, some kind of model train shop. I missed my chance, and still think about it from time to time
Yes, the WC will have the 1.02" rear shafts! No 5/8" spacer to worry about! lol
In case anyone is interested, I will be racing my RC10WC test car at OC_RC tonight in stock buggy. If any of you would like to try and make it out and try and make a class that would be great, or if you just have questions just look for the only RC10WC! lol
Tim Tunnermann
Team Associated Design Engineer
Team Associated | |Reedy | XP Digital | JConcepts | Futaba | Makita | Kicker | LiveRC
Patiofurnituregt wrote:Yes, the WC will have the 1.02" rear shafts! No 5/8" spacer to worry about! lol
In case anyone is interested, I will be racing my RC10WC test car at OC_RC tonight in stock buggy. If any of you would like to try and make it out and try and make a class that would be great, or if you just have questions just look for the only RC10WC! lol
Give a little more notice next time. I don't have any clay tires but I'd still like to come out and run.
Patiofurnituregt wrote:Yes, the WC will have the 1.02" rear shafts! No 5/8" spacer to worry about! lol
In case anyone is interested, I will be racing my RC10WC test car at OC_RC tonight in stock buggy. If any of you would like to try and make it out and try and make a class that would be great, or if you just have questions just look for the only RC10WC! lol
RC10 Short Arm | Novak Tempest ESC | Tamiya Torque Tuned 25T | Savox 1258 | Stealth Trans w/ Exotek Slipper Eliminator (geared 24/81)
RC10B3 | HW Just Stock Club Spec | Reedy 13.5 | Savox 1258
marlo wrote:I require the one on the left, hard to find, but I hope it never get's a re-re......
I thought I bought one like the older version but got the worlds in stead, kind of bummed me out back then and only used it for like one season
It's still in my box of discarded parts.
Didn't know it was so special until I saw one here when I first joined
The chassis Hoopty posted (on the left), I thought it was just a Late Graphite. I've been racing it against dirt oval purpose built cars and I'm making people shake their heads. But putting it back on the shelf.
marlo wrote:Never a worlds graphite Left is a late "Team".
That actually makes sense
I bought a used Team car and it had a CF tub and the older style CF chassis that were drilled to death
And that's the car I bought the extra chassis for
metallicats33 wrote:Dang,
Been real bussy lately and completly missed this announcement. I just put my pre-order in but I bet there won't be enough to go around Maybe I'll stop buy my LHS and ask them to order one for me as well. Worst case, I end up with two.
It has been stated in one of these threads that is NOT going to be a limited run like the Classic was. You will be OK.
A little side project.
I’ve had this in a drawer for a while and decided to get it cleaned.
It’s quite impressive what a thorough clean can result in.
Boiling water.
Simple green.
Toothbrush and pipe cleaners.
Brass brush on the Dremel and...
Last post
Final piece added.
The correct RPM springs.
If you need a pair, just send an email to RPM. They still have a stash.
I've putting together an all-in-one kit for those that want to get their boxart rere Kinwald cars a little closer to the original, or for those who are looking to make a correct replica. The kit will contain:
1 - Front shock tower in 2.5mm 3k woven...
Last post
I kinda doubt it. Too high of a material cost and I doubt the demand is there to make it worthwhile.
I need some help remembering the details from back in the day. So I have an RPM kit still in the bags never opened and I just don't have any love for it as an RPM car. Does the RPM kit actually duplicate a certain one off car or are some of the...
Last post
yes, I had one of those too bitd, flipped the front around to put the tower in front, still have some of the og deck standoffs in my box. I never detailed it to be like masamis but that is how I am leaning. I guess it's just a matter of committing...
I was just wondering if anyone is still making these chassis kits, either the NIX91 or the Justin/Fred version? Maybe someone has a spare that they'd like to sell or trade?
Thanks in advance
Last post
Actually, as another option, if you order a full set of 91 Stealth parts (Niki's for example) and this book by Steve Husting (the photos provide an excellent reference), you have pretty much everything needed to design your own chassis plates. It's...
Hi there, I recently inherited a Team Associated RC10 Worlds Car buggy from a recently deceased cousin. The car is unfortunately in a damaged state, and I would very much like to get it repaired to full working order due to the centimental value of...
Last post
has the parts you need. when you go to their site, in the left hand column, click on the r/c car. then click on associated. next, click on rc10 rpm, and there will be the front tower. if you click on rc10 (early models), in there will be the rear...