^ yes, do this. would look sick.GJW wrote:nice variety as usual brandonred junior rims
Different twist on a JRX2...
- howsyouraspen
- Approved Member
- Posts: 136
- Joined: Sun Oct 21, 2012 12:44 am
- Location: SLC, UT
- Has thanked: 84 times
- Been thanked: 25 times
Re: Different twist on a JRX2...
- Brandon G
- Approved Member
- Posts: 2106
- Joined: Mon Oct 01, 2007 4:23 pm
- Location: Nashville, TN
- Been thanked: 3 times
Re: Different twist on a JRX2...
Managed to find some red nuts.....
4-40 was easy thanks to CRC, 10-32 was a different story. I searched all over the place. I know Fastener Express has them, but I didn't want to pay $25 for 25 of them especially when I only need 4. Found slickzero.com had some aluminum nuts but were out of stock (according to the website) on the 10-32 in red. I emailed them asking when they'd get more in stock, no reply. I ordered a bunch of their 4-40 nuts for some other builds and when I got the package, they sent me 10 of the 10-32 in red for free!
Got the body mount made for the front. I need to get a JRXT rear body mount installed to sturdy it up a little. Don't have one, anybody here got one they don't need???
Paint is next. I have an HPI Nissan Skyline GT-R body set that I will be scrounging the decals from. Hopefully my next set of pics will show it completed.
4-40 was easy thanks to CRC, 10-32 was a different story. I searched all over the place. I know Fastener Express has them, but I didn't want to pay $25 for 25 of them especially when I only need 4. Found slickzero.com had some aluminum nuts but were out of stock (according to the website) on the 10-32 in red. I emailed them asking when they'd get more in stock, no reply. I ordered a bunch of their 4-40 nuts for some other builds and when I got the package, they sent me 10 of the 10-32 in red for free!
Got the body mount made for the front. I need to get a JRXT rear body mount installed to sturdy it up a little. Don't have one, anybody here got one they don't need???
Paint is next. I have an HPI Nissan Skyline GT-R body set that I will be scrounging the decals from. Hopefully my next set of pics will show it completed.
-
- Approved Member
- Posts: 802
- Joined: Tue Nov 08, 2011 9:43 am
- Location: Mount Airy , Maryland
- Been thanked: 1 time
Re: Different twist on a JRX2...
Nice !!!!
Late Edinger Gold Pan # 6010 .....Vintage Blackfoot....Electrix Circuit Stadium Truck ....Kyosho Ultima Pro XL
Re: Different twist on a JRX2...
Very nice Brandon! Stick with the yellow rims. Those babies are hard to find and look great on there. 

Gary
- Diggley
- Approved Member
- Posts: 1166
- Joined: Wed Jan 28, 2009 5:44 pm
- Location: is everything...
- Been thanked: 8 times
Re: Different twist on a JRX2...
We need one of those Facebook style "like" buttons on here...
I'm rarely in the Losi section, but it looks like I need to check it out more often.
It looks great!
I love the clean customs.
I'm rarely in the Losi section, but it looks like I need to check it out more often.

I love the clean customs.
Projects and shelfers:
Late Edinger, RC10B2, Dual Sport, GT, Kyosho Turbo Ultima, Triumph, Tamiya Sand Scorcher, Blackfoot/Monster Beetle, '67 Beetle, Nikko Rhino, Traxxas Fiero, Slash, Hand-built Dune Buggy..all on here somewhere...
Late Edinger, RC10B2, Dual Sport, GT, Kyosho Turbo Ultima, Triumph, Tamiya Sand Scorcher, Blackfoot/Monster Beetle, '67 Beetle, Nikko Rhino, Traxxas Fiero, Slash, Hand-built Dune Buggy..all on here somewhere...
- LosiXXkid
- Approved Member
- Posts: 757
- Joined: Sun Mar 03, 2013 5:35 pm
- Location: Islington, North London
- Has thanked: 2 times
- Been thanked: 8 times
Re: Different twist on a JRX2...
Very sharp!
Can't believe that I've never seen this one before.....!

~I'm a lot older now than I was then and wish that I knew then what I know now~
- Coelacanth
- Approved Member
- Posts: 7421
- Joined: Thu Jul 29, 2010 6:20 pm
- Location: Alberta, Canada
- Has thanked: 16 times
- Been thanked: 325 times
Re: Different twist on a JRX2...
Very pretty. Love the red anno/yellow wheels combo, great contrasting colors. What are you planning for a paint job?
Completed projects: CYANide Onroad Optima | Zebra Gold Optima | Barney Optima | OptiMutt RWD Mid
Gallery - Coel's Stalls: Marui Galaxy & Shogun Resto-Mods | FrankenBuff AYK Buffalo | 1987 Buick GNX RC12L3
Gallery - Coel's Stalls: Marui Galaxy & Shogun Resto-Mods | FrankenBuff AYK Buffalo | 1987 Buick GNX RC12L3
- DennisM
- Approved Member
- Posts: 2405
- Joined: Sun Feb 26, 2012 7:07 am
- Location: Denmark
- Has thanked: 30 times
- Been thanked: 62 times
Re: Different twist on a JRX2...
Would like to see this one painted - Has this happend?
I have the same body on an Optima JG truck conversion, who made it?
Thanks
I have the same body on an Optima JG truck conversion, who made it?
Thanks
Gone fishing
- JK Racing
- Approved Member
- Posts: 4618
- Joined: Thu Jul 19, 2007 2:32 pm
- Location: Placentia, CA
- Has thanked: 129 times
- Been thanked: 242 times
Re: Different twist on a JRX2...
I think that is the Proline Nissan Hardbody?
--Joey --
Vintage A&L and Factory Works
Old School Racer & Vintage RC Car nut
JKRacingRC.com
Vintage A&L and Factory Works
Old School Racer & Vintage RC Car nut
JKRacingRC.com
- DennisM
- Approved Member
- Posts: 2405
- Joined: Sun Feb 26, 2012 7:07 am
- Location: Denmark
- Has thanked: 30 times
- Been thanked: 62 times
Re: Different twist on a JRX2...
JK racing - Thanks for replying.
I guess it is, but when I googled it, Proline Nissan Hardbody nothing like it showed up.
I was offered some car mats and other Proline bodies, but not the one pictured.
I guess it is, but when I googled it, Proline Nissan Hardbody nothing like it showed up.
I was offered some car mats and other Proline bodies, but not the one pictured.
Gone fishing
- GoMachV
- Approved Member
- Posts: 12186
- Joined: Sun Apr 29, 2012 10:31 pm
- Location: Twin Falls, ID
- Has thanked: 1080 times
- Been thanked: 3731 times
Re: Different twist on a JRX2...
Here's my Nissan hardbody, hard to photo. Looks similar but can't say 100%


Create an account or sign in to join the discussion
You need to be a member in order to post a reply
Create an account
Not a member? register to join our community
Members can start their own topics & subscribe to topics
It’s free and only takes a minute
Sign in
-
- Similar Topics
- Replies
- Views
- Last post
-
- 18 Replies
- 2346 Views
-
Last post by Erich Reichert
-
- 1 Replies
- 858 Views
-
Last post by joel45acp
-
- 10 Replies
- 984 Views
-
Last post by Mr. ED
-
- 5 Replies
- 905 Views
-
Last post by Jay Dub
-
- 1 Replies
- 691 Views
-
Last post by matt1ptkn
-
- 27 Replies
- 3947 Views
-
Last post by GoldRush
-
- 10 Replies
- 2027 Views
-
Last post by Mr. ED
-
- 1 Replies
- 1060 Views
-
Last post by DaveM
Who is online
Users browsing this forum: No registered users and 6 guests