Intriguing ad in RC Car Action - RC10 re-release?
- marlo
- Approved Member
- Posts: 2071
- Joined: Tue Jan 22, 2013 5:31 pm
- Has thanked: 18 times
- Been thanked: 22 times
Re: Intriguing ad in RC Car Action - RC10 re-release?
Damn it, just my luck, I got a perfect chassis. I was very much hoping for one without counter sunk hole's. had a look over some of the parts very quickly, Some look very close to the American originals, but you can tell what's new vs. original.
- GoMachV
- Approved Member
- Posts: 12185
- Joined: Sun Apr 29, 2012 10:31 pm
- Location: Twin Falls, ID
- Has thanked: 1080 times
- Been thanked: 3730 times
Re: Intriguing ad in RC Car Action - RC10 re-release?
Did yours have the crushed areas by the rear arm mounts? Just wondered if that was only on some as well
- marlo
- Approved Member
- Posts: 2071
- Joined: Tue Jan 22, 2013 5:31 pm
- Has thanked: 18 times
- Been thanked: 22 times
Re: Intriguing ad in RC Car Action - RC10 re-release?
Not sure what you mean...Are you talking about the #6360's, I just gave them a very quick look, and found the "L", and "R" to be on opposite side's then the originals, so you cannot get them mixed up, do you have a pic?gomachv wrote:Did yours have the crushed areas by the rear arm mounts? Just wondered if that was only on some as well
- knixdad
- Approved Member
- Posts: 396
- Joined: Thu Jun 06, 2013 3:48 pm
- Location: Califon, New Jersey
- Has thanked: 2 times
- Been thanked: 4 times
Re: Intriguing ad in RC Car Action - RC10 re-release?
I looked at a old black B chassis I have, it has the crushed areas near the mount area as well.
I miss brushed motors in that hazy, everything seemed better when I was a kid, kind of way.
- marlo
- Approved Member
- Posts: 2071
- Joined: Tue Jan 22, 2013 5:31 pm
- Has thanked: 18 times
- Been thanked: 22 times
Re: Intriguing ad in RC Car Action - RC10 re-release?
I would think it would be something that I would put aside, but I doubt it'll fetch high dollars, so send it my way for a minty new replacementclm wrote:Should save that factory error chassis.... it might be worth money someday![]()
Chris

-
- Approved Member
- Posts: 699
- Joined: Sat Mar 06, 2010 3:38 pm
- Location: Vraa Denmark
- Been thanked: 1 time
Re: Intriguing ad in RC Car Action - RC10 re-release?
The crushed area your referring to is made by the punch & die they use to cut the slot in the chassisknixdad wrote:I looked at a old black B chassis I have, it has the crushed areas near the mount area as well.

Morten Max
- GoMachV
- Approved Member
- Posts: 12185
- Joined: Sun Apr 29, 2012 10:31 pm
- Location: Twin Falls, ID
- Has thanked: 1080 times
- Been thanked: 3730 times
Re: Intriguing ad in RC Car Action - RC10 re-release?
Haha they don't even have the front anti roll bar, MSC, motor, and suicide cables in the box anymore!marlo wrote:I had a hell of a time getting all the bags to fit back in the box, I tried so many different combo's till I got the lid to close
This is the area I was referring to, I remember it being there but not so "blatant"
- Attachments
-
- image.jpg (29.49 KiB) Viewed 845 times
- image.jpg (29.49 KiB) Viewed 845 times
Re: Intriguing ad in RC Car Action - RC10 re-release?
I was out of town this weekend and got an email on Saturday saying they could not process my backorder because my card was decline...DUH...just got a new debit card last month because there was a security breach at my bank and they had to cancel a bunch of card numbers and re-issue cards with new numbers...I forgot all about this being on the old number...now I have to wait for Monday to straighten it out. It did say they were holding my product for me and gave me an email address to contact so I did. Just a little bummed I have to wait a bit longer but I will not be building right away anyway.
-Joe
-Joe
- marlo
- Approved Member
- Posts: 2071
- Joined: Tue Jan 22, 2013 5:31 pm
- Has thanked: 18 times
- Been thanked: 22 times
Re: Intriguing ad in RC Car Action - RC10 re-release?
OH, ok, my bad, yes Mine is like that as well, The colour of my chassis is the same tone as my late "C" stamp. Motor plate, as the nose plate seem to all match. The shocks, are more of a bright gold, and glad to say the shock caps will never get confused with originals 

-
- Approved Member
- Posts: 699
- Joined: Sat Mar 06, 2010 3:38 pm
- Location: Vraa Denmark
- Been thanked: 1 time
Re: Intriguing ad in RC Car Action - RC10 re-release?
That looks just like my 2 black B stamp and my C stamp
However
My 2 A stamp are slightly different



However
My 2 A stamp are slightly different



Morten Max
- GoMachV
- Approved Member
- Posts: 12185
- Joined: Sun Apr 29, 2012 10:31 pm
- Location: Twin Falls, ID
- Has thanked: 1080 times
- Been thanked: 3730 times
Re: Intriguing ad in RC Car Action - RC10 re-release?
Let me guess, Chase? Lol- same deal here. We are sending you a new card cause we think there is a problem, but were gonna leave your old card operational just let us know if you see any fraudjoeman37 wrote:I was out of town this weekend and got an email on Saturday saying they could not process my backorder because my card was decline...DUH...just got a new debit card last month because there was a security breach at my bank and they had to cancel a bunch of card numbers and re-issue cards with new numbers...I forgot all about this being on the old number...now I have to wait for Monday to straighten it out. It did say they were holding my product for me and gave me an email address to contact so I did. Just a little bummed I have to wait a bit longer but I will not be building right away anyway.
-Joe

Re: Intriguing ad in RC Car Action - RC10 re-release?
No this was Associated Bank and they sent the new card with a letter that said the old card and number would be deactivated in 30 days if I activated the new one or not. I was a little irritated because I had the old number memorized but I have Packer checking and have been saving my old Packer Debit cards to display one day when I closed the account but now I can do it early. Just hope I can still get in on this batch and I also have nothing showing my discount will apply because when I ordered it said the $40 discount on purchase over 250 would apply when all back ordered items shipped so they should be looking for 210 but said they were trying to charge my card 250.gomachv wrote:
Let me guess, Chase? Lol- same deal here. We are sending you a new card cause we think there is a problem, but were gonna leave your old card operational just let us know if you see any fraudI miss Washinton Mutual, wish I had left when Chase took over. It's on my list if things to do...lol.
-Joe
-
- Approved Member
- Posts: 3876
- Joined: Tue Feb 07, 2006 2:12 pm
- Has thanked: 169 times
- Been thanked: 151 times
Re: Intriguing ad in RC Car Action - RC10 re-release?
definitely more apparent. theres about 3x more of the pinch distortion back by the rear arm mounts.gomachv wrote:This is the area I was referring to, I remember it being there but not so "blatant"
Create an account or sign in to join the discussion
You need to be a member in order to post a reply
Create an account
Not a member? register to join our community
Members can start their own topics & subscribe to topics
It’s free and only takes a minute
Sign in
-
- Similar Topics
- Replies
- Views
- Last post
-
- 0 Replies
- 2761 Views
-
Last post by railey72
-
- 4 Replies
- 1867 Views
-
Last post by vitamink
-
- 15 Replies
- 4719 Views
-
Last post by RCveteran
-
- 12 Replies
- 1881 Views
-
Last post by Superathlete
-
- 6 Replies
- 1801 Views
-
Last post by speedemall
-
- 27 Replies
- 3536 Views
-
Last post by longboardnj
-
- 1 Replies
- 1498 Views
-
Last post by teshreve
-
- 13 Replies
- 3650 Views
-
Last post by romulus22
Who is online
Users browsing this forum: radioactivity,
XLR8 and 5 guests