You been peeking through my window again?Coelacanth wrote:I know the feeling you had, Jake...the one where you ask yourself, "Did I just f---ing do what I THINK I did?!?" usually followed by a period of throwing or breaking something nearby, self-loathing, and finally settling into a state of shame.
What a moron, fried a new ESC
- Russ Winn
- Approved Member
- Posts: 459
- Joined: Sat Nov 20, 2010 9:52 am
- Location: Hillbilly Hell, Fl.
- Has thanked: 49 times
- Been thanked: 80 times
Re: What a moron, fried a new ESC
-
- Approved Member
- Posts: 958
- Joined: Mon Oct 05, 2009 10:59 am
- Location: Manila/Singapore
- Been thanked: 3 times
Re: What a moron, fried a new ESC
Jake,
i think you can still have a 1 to 1 replacement, but it will cost you $73 bucks plus shipping and handling fee. you can try if you can have it for free
just tell thats its only one week old and also send the receipt. who knows lady luck might be on your side and give it to you for free.
Fill out this http://www.teamtekin.com/Forms/2012_SRF.pdf and send them an email for a SR# before sending the unit.
else they will not process your claim.
goodluck,
i think you can still have a 1 to 1 replacement, but it will cost you $73 bucks plus shipping and handling fee. you can try if you can have it for free
just tell thats its only one week old and also send the receipt. who knows lady luck might be on your side and give it to you for free.
Fill out this http://www.teamtekin.com/Forms/2012_SRF.pdf and send them an email for a SR# before sending the unit.
else they will not process your claim.
goodluck,
“It is more shameful to distrust our friends than to be deceived by them.”
― Confucius
― Confucius
- Seabass
- Business Member
- Posts: 1402
- Joined: Mon Jul 27, 2009 8:34 pm
- Location: Mississippi
- Been thanked: 12 times
Re: What a moron, fried a new ESC
Well just dropped some serious coin on two new RS esc's with an 8.5 and a 17.5. They should arrive in about two weeks.
I will hang onto the buned one until I get back to the states and send it in for the replacement.
Jake
I will hang onto the buned one until I get back to the states and send it in for the replacement.
Jake
- Seabass
- Business Member
- Posts: 1402
- Joined: Mon Jul 27, 2009 8:34 pm
- Location: Mississippi
- Been thanked: 12 times
Re: What a moron, fried a new ESC
New ESCs and motor combos arrived today
Won't make that mistake again.
Jake

Won't make that mistake again.
Jake
- Lonestar
- Approved Member
- Posts: 4270
- Joined: Wed Dec 12, 2007 5:17 am
- Location: Switzerland, yannow, in Europe (or almost)
- Has thanked: 623 times
- Been thanked: 170 times
Re: What a moron, fried a new ESC
you'd be surprised...bigjeepzz wrote:Won't make that mistake again.

AE RC10 - Made In The Eighties, Loved By The Ladies.
Blue Was Better - now, Blue Is Bankrupt.
Facebook affiliate program manager: "They go out and find the morons for me".
Life is short. Waste it wisely.
Blue Was Better - now, Blue Is Bankrupt.
Facebook affiliate program manager: "They go out and find the morons for me".
Life is short. Waste it wisely.
- EvolutionRevolution
- Approved Member
- Posts: 1494
- Joined: Tue Feb 01, 2011 3:24 pm
- Location: Netherlands
- Has thanked: 17 times
- Been thanked: 34 times
- JK Racing
- Approved Member
- Posts: 4618
- Joined: Thu Jul 19, 2007 2:32 pm
- Location: Placentia, CA
- Has thanked: 129 times
- Been thanked: 242 times
Re: What a moron, fried a new ESC
Even though I have let the magic smoke out of motors before, they never took the speedo with them....until this past weekend. Motor cogged a bit, went about 4 feet on the track and puff....thought it was the motor, but it was both.
Novak GTB2 - up in smoke. I bought it a few years ago, but hadnt used it but a few times, maybe 10 packs total. Still not sure how the motor took out the speedo, but had heard that before and discounted it as urban legend.
Live and learn
Novak GTB2 - up in smoke. I bought it a few years ago, but hadnt used it but a few times, maybe 10 packs total. Still not sure how the motor took out the speedo, but had heard that before and discounted it as urban legend.
Live and learn

--Joey --
Vintage A&L and Factory Works
Old School Racer & Vintage RC Car nut
JKRacingRC.com
Vintage A&L and Factory Works
Old School Racer & Vintage RC Car nut
JKRacingRC.com
Re: What a moron, fried a new ESC
JK Racing wrote:Even though I have let the magic smoke out of motors before, they never took the speedo with them....until this past weekend. Motor cogged a bit, went about 4 feet on the track and puff....thought it was the motor, but it was both.
Novak GTB2 - up in smoke. I bought it a few years ago, but hadnt used it but a few times, maybe 10 packs total. Still not sure how the motor took out the speedo, but had heard that before and discounted it as urban legend.
Live and learn
This is an old post but just had the same thing happen to me this wknd and cant figure out why. GTB2 that I've used for a year or better with a 10.5 in a blitz. Never had a problem with this setup. My friend and I decided to build a pure straight line speed car so we bought a 3.5 Novak motor and hooked it up to the GTB2. We hooked a battery to it to see if we had everything wired correctly. pulled the trigger lightly and it ran fine. Everything tested ok so I walked over to unplug battery and all of a sudden the esc burst into a thick stinky smoke. It got so hot it unsoldered the battery leads and the cap.
There are 2 different GTB2's evidently. 1 that only handles a 6.5 or higher and the other 3.5 and up. I found the box for mine and it is the latter so it should have been ok. I have no idea what happened. Any thoughts? It was a new motor. Dont know if it fried it too but Im afraid to hook it to a new esc anyway in fear id blow up another one.
-
- Approved Member
- Posts: 1679
- Joined: Sun Aug 13, 2006 10:54 pm
- Location: Houston Texas
- Has thanked: 2 times
- Been thanked: 5 times
Re: What a moron, fried a new ESC
Sorry to hear about the bad luck in this thread, I have smoked a couple esc's in my day.
I don't mean to pour salt in the wound, but I can't help to think about that one phrase that everyone loves to bash on......
Due to the nature of the hobby......
I don't mean to pour salt in the wound, but I can't help to think about that one phrase that everyone loves to bash on......
Due to the nature of the hobby......

- slotcarrod
- Approved Member
- Posts: 4415
- Joined: Tue Nov 25, 2008 10:57 pm
- Location: Calgary Alberta Canada
- Has thanked: 1 time
- Been thanked: 45 times
Re: What a moron, fried a new ESC
Russ Winn wrote:You been peeking through my window again?Coelacanth wrote:I know the feeling you had, Jake...the one where you ask yourself, "Did I just f---ing do what I THINK I did?!?" usually followed by a period of throwing or breaking something nearby, self-loathing, and finally settling into a state of shame.
Lol I looked over my shoulder as well!

Sorry for your loss Jake, not to worry, it has even happened to me more than once!




Shame on you Reg!

EDIT: Just noticed this was an old post!


Rod Littau
Slotcarrod's Rumpus Room: http://www.rc10talk.com/viewtopic.php?f=77&t=16113
25 Years of the RC10: http://www.rc10talk.com/viewtopic.php?f=35&t=13059
Slotcarrod's Rumpus Room: http://www.rc10talk.com/viewtopic.php?f=77&t=16113
25 Years of the RC10: http://www.rc10talk.com/viewtopic.php?f=35&t=13059
- JK Racing
- Approved Member
- Posts: 4618
- Joined: Thu Jul 19, 2007 2:32 pm
- Location: Placentia, CA
- Has thanked: 129 times
- Been thanked: 242 times
Re: What a moron, fried a new ESC
I've had some bad luck lately, in one week I plugged 2 different speedos in backwards and let the magic smoke out. (this was a little while back)
So cheer up everyone, we all like to smoke some electronics once in a while

So cheer up everyone, we all like to smoke some electronics once in a while


--Joey --
Vintage A&L and Factory Works
Old School Racer & Vintage RC Car nut
JKRacingRC.com
Vintage A&L and Factory Works
Old School Racer & Vintage RC Car nut
JKRacingRC.com
- Seabass
- Business Member
- Posts: 1402
- Joined: Mon Jul 27, 2009 8:34 pm
- Location: Mississippi
- Been thanked: 12 times
Re: What a moron, fried a new ESC
HAHAHA, at least my two new ESCs are still running strong. I still have the smelly, burnt one in the box waiting to be replaced. I imagine it will make its way back to Tekin in the next few weeks.
I will always remember this stupid mistake, and I am certain it will happen in the future again.
As Rod says, make sure you are sticking it in the proper hole, if not it might get very stinky
Jake
I will always remember this stupid mistake, and I am certain it will happen in the future again.
As Rod says, make sure you are sticking it in the proper hole, if not it might get very stinky

Jake
Create an account or sign in to join the discussion
You need to be a member in order to post a reply
Create an account
Not a member? register to join our community
Members can start their own topics & subscribe to topics
It’s free and only takes a minute
Sign in
-
- Similar Topics
- Replies
- Views
- Last post
-
- 43 Replies
- 7732 Views
-
Last post by scr8p
-
- 2 Replies
- 717 Views
-
Last post by tecnica2001
-
- 6 Replies
- 1738 Views
-
Last post by scr8p
-
- 13 Replies
- 3852 Views
-
Last post by ttc95
-
- 8 Replies
- 1143 Views
-
Last post by bhamptn
-
- 19 Replies
- 2469 Views
-
Last post by Bongo Fury
-
- 4 Replies
- 1076 Views
-
Last post by minimini
-
- 3 Replies
- 1572 Views
-
Last post by SteveMax
Who is online
Users browsing this forum: No registered users and 4 guests