GoMachV's Pin Router thread (for reproducing 2d parts)

Post by **klavy69** » Mon Jul 15, 2013 8:54 pm

gomachv wrote:I'm still trying to see how that benefits me

by making someone else happy

Todd

Post by **fredswain** » Mon Jul 15, 2013 9:21 pm

klavy69 wrote:there is a front shocktower behind all those spring clips

They are front springs on rear shocks so that's the only way they'd work! Rear spring rates are all wrong for the front. I just like the silly tall shocks up front.

Post by **klavy69** » Mon Jul 15, 2013 9:29 pm

Yeah, was just kidding you. Kinda figured what they were when I seen all the clips and read the tower was taller. You guys are doing some great work. Keep it up and start producing some of the for the b/s/t area

Todd

Post by **fredswain** » Mon Jul 15, 2013 9:32 pm

Gladly. What do you want?

I'm about to buy chassis blanks with the nose kick so I can start doing full chassis.

Post by **JK Racing** » Tue Jul 16, 2013 3:47 am

fredswain wrote:Gladly. What do you want?

I'm about to buy chassis blanks with the nose kick so I can start doing full chassis.

jrx pro rear tower with b4 wing holes
"worlds" front for .89
"worlds? rear with b4 holes

losi in black, ae towers in natural or greenish/yellowish color

Post by **Incredible_Serious** » Tue Jul 16, 2013 6:33 am

klavy69 wrote:
gomachv wrote:I'm still trying to see how that benefits me
by making someone else happy

Todd

[youtube]snsj0L8-4Iw[/youtube]

Nice undies, GM5.....

Post by **Incredible_Serious** » Tue Jul 16, 2013 6:41 am

fredswain wrote:Gladly. What do you want?

I'm about to buy chassis blanks with the nose kick so I can start doing full chassis.

I'd like some PB Mini Mustang chassis plates...... please.........

Three or four should do......

Alex

Post by **fredswain** » Tue Jul 16, 2013 11:59 am

I can do those. I need to order more material.

JK Racing wrote:
fredswain wrote:Gladly. What do you want?
I'm about to buy chassis blanks with the nose kick so I can start doing full chassis.
jrx pro rear tower with b4 wing holes
"worlds" front for .89
"worlds? rear with b4 holes

losi in black, ae towers in natural or greenish/yellowish color

Post by **fredswain** » Tue Jul 16, 2013 12:00 pm

If I had an original to copy I could do it.

Incredible_Serious wrote:
fredswain wrote:Gladly. What do you want?

I'm about to buy chassis blanks with the nose kick so I can start doing full chassis.

I'd like some PB Mini Mustang chassis plates...... please.........

Three or four should do......

Alex

Post by **klavy69** » Tue Jul 16, 2013 6:00 pm

Incredible_Serious wrote:

Nice undies, GM5.....

is that sarcasm...?

Post by **fredswain** » Tue Jul 16, 2013 11:56 pm

Here it is. My very first chassis. Once I get comfortable with these I'll start working on chassis with a built in kick.

Post by **GoMachV** » Wed Jul 17, 2013 12:26 am

I like it

Post by **fredswain** » Wed Jul 17, 2013 12:30 am

A countersink bit and a drill press really help make things go quickly. This whole thing took me about half an hour. Not too bad for the first one. There is actually more to this one than is shown though. It will be a modern design with additional side pieces that stack on top of each other. Look at the X-Factory X6^3 pictures to see what I mean. My old Atomic Carbon CR2 chassis was done the same way. Very stiff and very strong. This one is going on my friend Chad's car. He's getting the shock towers I made too.

Post by **uniquenamehere** » Wed Aug 14, 2013 12:04 pm

What cutters are you using? And how long do they last?

I'm thinking about copying your design... my brother in law has a lathe and can probably whip me up a pin like you got.

Post by **GoMachV** » Wed Aug 14, 2013 12:23 pm

The cutters I have a just carbide cutters from the PC board industry. Found em on eBay- need to find more! I get quite a bit of use out of em, probably 10 chassis or so. I cut so many small parts its hard to keep count

RC10Talk - The Net's Largest Vintage R/C Community

GoMachV's Pin Router thread (for reproducing 2d parts)

Re: GoMachV's Pin Router thread (for reproducing 2d parts)

Re: GoMachV's Pin Router thread (for reproducing 2d parts)

Re: GoMachV's Pin Router thread (for reproducing 2d parts)

Re: GoMachV's Pin Router thread (for reproducing 2d parts)

Re: GoMachV's Pin Router thread (for reproducing 2d parts)

Re: GoMachV's Pin Router thread (for reproducing 2d parts)

Re: GoMachV's Pin Router thread (for reproducing 2d parts)

Re: GoMachV's Pin Router thread (for reproducing 2d parts)

Re: GoMachV's Pin Router thread (for reproducing 2d parts)

Re: GoMachV's Pin Router thread (for reproducing 2d parts)

Re: GoMachV's Pin Router thread (for reproducing 2d parts)

Re: GoMachV's Pin Router thread (for reproducing 2d parts)

Re: GoMachV's Pin Router thread (for reproducing 2d parts)

Re: GoMachV's Pin Router thread (for reproducing 2d parts)

Re: GoMachV's Pin Router thread (for reproducing 2d parts)

Create an account or sign in to join the discussion

Create an account

Sign in

Who is online