chops w.o.i.n

[chophead69]

Rc carbon works carbon fiber chassis
Rc carbon works front hybird tower
Rc carbon works rear short worlds tower for b4 shocks
Andy's rear bulkhead
Andy's rear a arm mounts
Andy's truck front bumper
Klien arms front and rear
Rouge tranny case(no gears yet)
kranzels rear hubs
New black rc10t nose plate
A&l steering setup
Rc10t front bulkhead new but changing out to a black one
new black motor plate and motor guard for a graphite
more to come I have this one and two others I am building but I wanted to start a thread just for this one because its a new piece by piece build.trying to find all the parts I want to use is hard but I am getting there.I am hoping to have a roller soon

[jwscab]

Looks great! Do yourself a favor and get these parts:

http://www3.towerhobbies.com/cgi-bin/wti0001p?&I=LXVC39&P=7

they also are made in metal, and more than likely an aftermarket vendor makes aluminum ones in different colors.

get some nose brace tubes, line everything up, and drill some holes in the chassis to secure them. this will prevent you from folding the nose up on the car in case of any hard front landings.

rccarbonworks should be advised to predrill holes to add these parts.

[blown5.0]

Looking very nice so far, look forward to the finish.

[marlo]

That's looking great, the aluminum Rouge tranny works well with carbon.

[Showcase1186]

Very impressive looking!!!! I have an aluminum houge bell crank I've got no use for, that would look right at home instead of the neon one you're currently using. Other than that, PICTURE PERFECT! Oh yeah, keep the pics coming!

[chophead69]

Thanks guys I already know I need to brace the chassis.I really don't want to use the plastic mounts so I have been looking for the aftermarket tube braces but I cant find them.I have some titanium rod to use as braces.but need help finding the mounts.anyone?????help??! Anyway I mite use this body but not sure yet.and if anyone needs a banging painter let me know.guy is awesome.I will pm you about the steering I can use them.

[vintage AE]

Based on what I've seen so far, that body will look pretty good.

[RC10 Junkie]

That body is fabulous man! I look forward to your progress!

[slotcarrod]

That body is fabulous man! I look forward to your progress!

x2 Very nice looking.

[chophead69]

I know its been awhile but I am still working on this build.i did brace up the front end and I just need to figure out how to post pics with what I got to work with. I did talk with dan and he is willing to drill the holes in his chassis so you can brace up the nose plate.

[Chris00gt]

Very nice!! Look forward to seeing the updated photo's!!!!

[Kripto]

Looks so nice!

I have this same setup in my minds, love the rc carbon parts!

[kink]

Lovely! Close to what I have built in some ways.

[chophead69]

Wow it shouldn't be so hard to down load pics I must be doing something wrong. So now its got the b4 big bores in rear and t4 big bores in rear. I have aluminum front steering blocks and arms. The fronnt it now tied in with titanium from the bulkhead to to trinity front gt mounts. They were not a easy find lol. I have a aluminum diff gear and a robinson idler gear with a losi hydra setup going in. I just got the b44 cvds and some other new parts and I also got yellow rpm ball cups and I am thinking about using yellow jconcept spoke type wheels.

[Showcase1186]

Lookin good! I never saw any action pics of the Kinwald WOIN racer you bought???