Measured twice and drew lines on my chassis, used 2 big C clamps and a good ol' stick of wood as a guide for my dremel.
![Image](http://i49.photobucket.com/albums/f275/KymsCowby/DSC_0091-1.jpg)
so one broken cut off wheel later...
![Image](http://i49.photobucket.com/albums/f275/KymsCowby/DSC_0092-1.jpg)
Reset the stick-o-wood and did the other side for this:
![Image](http://i49.photobucket.com/albums/f275/KymsCowby/DSC_0093-1.jpg)
the I took what was left of the side pods and hollowed them out:
![Image](http://i49.photobucket.com/albums/f275/KymsCowby/DSC_0094-1.jpg)
ground them smooth...looks like nerf bars
![Smile :)](./images/smilies/icon_smile.gif)
![Image](http://i49.photobucket.com/albums/f275/KymsCowby/DSC_0095-1.jpg)
so, out comes the heat gun and 2 more sticks-o-wood, heat up the nerf bars and clamp 'em straight.
![Image](http://i49.photobucket.com/albums/f275/KymsCowby/DSC_0096-1.jpg)
let them cool for an hour and pulled them out. tomorrow, I will glue them onto the sides of the chassis, trim up the overhang bits and take a completed chassis picture
![Image](http://i49.photobucket.com/albums/f275/KymsCowby/DSC_0097-1.jpg)