Pinky project...

[REMJ666]

Gotta figure out what to do with this one next ...

[GoMachV]

For starters I'd brace it up a bit I have seen some cheap carbon fiber strips in the local hobby stores, it would be pretty easy to run a pair from then rear bulkhead side bolts to the nose tube area, like the A&L brace did.

[REMJ666]

I like that idea...Thank you...

[scr8p]

Gotta figure out what to do with this one next ...

ignore it.

[REMJ666]

The power of the car compels me

[REMJ666]

PARTS !!!!!!! Now i can start making progress on this bad boy More parts on the way

[Russ Winn]

Wow man...Looks like you're in for a really good time, except I didn't see a new chassis tub.

Keep us posted on the build.

[REMJ666]

My local track just brought back oval and i am happy as heck...Will need some setup tips from the roundy round crowd soon...Carpet oval...

[Russ Winn]

...Carpet oval...

A little different than dirt, but the basics should be the same.

[REMJ666]

Probably the best decision that i will have made on this project so far....After seeing the pics i think everyone will agree...Just needs a little cleaning behind the ears

[REMJ666]

To use 30 degree cast blocks or 5 degree caster blocks on the car ??? It will be run on a carpet oval...Any advice would be greatly appreciated...

[REMJ666]

Brand new suspension mounts , aluminum steering has new green rubber seal bearings and rear bulkhead installed...For now I am sure i will change my mind again and make more changes

[Russ Winn]

To use 30 degree cast blocks or 5 degree caster blocks on the car ??? It will be run on a carpet oval...Any advice would be greatly appreciated...

Try to split the difference, if you have any other blocks. A lot would have to do with the bite you're getting, and corner radius.
Most carpet is pretty high bite, so get some laps in and start with shock settings before playing with caster or camber. Are you going to run the standard buggy shocks, or short ones?

[REMJ666]

Those are my choices for now...I will rebuild the gray team car shocks and use them...I have a front buggy spring kit and those choices are blue , white , green , black and brown...I was only able to buy blue springs for the rear because that is what they had left...They had a huge blow out sale and that is how i got alot of the parts...Found one set of b3/b2 for 3/16 axle [ mip cvd kit ] so i will get the duratrax front evader wheels and nitro evader rears for now...Did you buy those RPM wide arms new from them or did you already have them ????

[Russ Winn]

It's hard to say without getting on the track. As far as springs, start with the blue on the right front. I'm also using brown on the left front, but I'm on dirt. Tires will also have a lot to do with it. Since you're on carpet, I'd go with purple or white foams. I think you'd get a lot of snap roll with rubber tires. That's about all I can say, until you get some laps in, and report what's it doing.