Blue pan

[jwscab]

I would spend the hour or so it takes and rebuild it anyway. It's really not hard and you can see exactly what is broken/incomplete/needs repair.

[THUNDERSTRIKE1]

Well i shipped you a ziplock bag of parts with your new chassis setup an green machine body lmao.DON

[Bent]

I would spend the hour or so it takes and rebuild it anyway. It's really not hard and you can see exactly what is broken/incomplete/needs repair.

Will do, and thanks for the info.

Well I shipped you a ziplock bag of parts with your new chassis setup an green machine body lmao.DON

SWEEEEET!!!!!! Thanks man, guess now I don't need to hunt for all the little bits that I will need. Ill let you know as soon as it gets here.

[Bent]

Well did a little more work on the car, snaged a used but good body From Don. Swapped the arms out for something a little more appropriate. Need 6 bits to have the car done.





Jkracing I checked the LHS's no one has the old gears. I dont know what to do now other than make it a stealth too even though I was looking forward to a 6 gear.

[JK Racing]

Car is looking good.

Jkracing I checked the LHS's no one has the old gears. I dont know what to do now other than make it a stealth too even though I was looking forward to a 6 gear.

Spur gears? Any pan car spur gear should fit, try http://kimbroughracingproducts.com/store/index.php?dispatch=categories.view&category_id=217

these already even have diff balls installed for ya...

[rc10johnny]

Hey "B", what gears do ya Need?????

[Bent]

Car is looking good.

Thanks JK. Like I said still a few things to button up.

Hey "B", what gears do ya Need?????

Apparently one that has little BB's squeezed into them kinda like this one..........................................

[Bent]

Small update still waiting on new tires, "clutch pads", and few other bits to show up. I have now how ever have some issues with the steering, binding up. I also removed all the electronics they are good just cant seem to get the esc to take sauter. So with that said on to the BST.

[Bent]

Parts have showed, trying to get the steering straight so it don't bind. I also need to have the esc rewired. An get a wing mounted on the car. I will post pics when i get all this done.

[Bent]

Ok the car is complete and now has a Stealth trans mission. I wanted a 6 gear but i cannot seem to find the bits i need for it so in went the stealth.
My Futaba esc exploded so in went the Traxxas yellow xl5 esc. I manage to snag a new wing and have no clue what to do with it, I know I want it clear. I have also added a set of aluminum front wheels, and Im not sure what brand they are, I just know they are mine and need to be cleaned.




JUST WANTED TO TELL DON THANK YOU. HAD IT NOT BEEN FOR ALL THE BITS AND THE HELP YOU SENT THIS CAR WOULD HAVE BEEN GONE BY NOW. SO THANK YOU.

JOHNNY THANK YOU AS WELL FOR THE BITS THAT YOU SENT.

[rc10johnny]

Hey "B" send me the 6 gear ....I'll check her out fer ya...JohnnySr

[THUNDERSTRIKE1]

Lookin Awsume now!! Get busy with the decals on the wing.Cut them as close to the edges as can and lay them on the wing or use scotch tape to hold in place til you decide the placement for them.Also YOUR WELCOME.dON

[Bent]

Johnny you have pm

Don I still haven't a clue what i wanna do with that wing.


I did take the car out yesterday for a min at my job I was on, I forgot just how fun a non converted buggy was. I haven't driven one in 6 years give or take.

Don you also have message.