Damnit why are Tamiya Tires So Good Looking

[terry.sc]

Real alloy wheels in Tamiya SRB style - easy.
http://www.tamiyaclub.com/trades_model.asp?cid=51758&id=1892

[mikedealer]

excellent, thanks for the link...

should i be able to use these
http://www2.towerhobbies.com/cgi-bin/wti0001p?&I=LXN057&P=M
for the rear adapters?

[Tadracket]

Yummy!!!

[Tadracket]

excellent, thanks for the link...

should i be able to use these
http://www2.towerhobbies.com/cgi-bin/wti0001p?&I=LXN057&P=M
for the rear adapters?

They will not fit the older axles without some modding. I am currently working on that for my A&L build.

[mikedealer]

oh man nothing can be easy ugh... lol. god i am having the hardest fricken time finding tires that will work. just want some simple sand paddles, and some single rib fronts with aluminum rims lol. guess i gotta pray for the sunday night ebay gods to bestow some auctions for me to bid on.

[Tadracket]

If it is paddles you want and they are 1.5 Tammies, those will go nicely on the original three piece associated rims.



These are the Grasshopper reissues. Check out my perty shox

[mikedealer]

are these the same ones?
http://cgi.ebay.com/Rear-Tyre-Tamiya-Sand-Scorcher-Sand-Tires-Unlimited-SRB_W0QQitemZ250170769763QQihZ015QQcategoryZ34063QQssPageNameZWDVWQQrdZ1QQcmdZViewItem

[terry.sc]

excellent, thanks for the link...

should i be able to use these
http://www2.towerhobbies.com/cgi-bin/wti0001p?&I=LXN057&P=M
for the rear adapters?

No, those enable you to fit hex drive wheels onto just about anything - even the RC10.

You need a set of these http://cgi.ebay.co.uk/CRP-1560-Rear-Wheel-Adapters-RC10-to-Truck_W0QQitemZ180164783803QQihZ008QQcategoryZ34063QQssPageNameZWDVWQQrdZ1QQcmdZViewItem

are these the same ones?
http://cgi.ebay.com/Rear-Tyre-Tamiya-Sand-Scorcher-Sand-Tires-Unlimited-SRB_W0QQitemZ250170769763QQihZ015QQcategoryZ34063QQssPageNameZWDVWQQrdZ1QQcmdZViewItem

Yes, that's them.

[JK Racing]

http://www2.towerhobbies.com/cgi-bin/wti0001p?&I=LXN057&P=M

So what is the smaller hex used for....is that Losi 4wd buggy front sized? Or is my imagination running wild.

[scr8p]

http://www2.towerhobbies.com/cgi-bin/wti0001p?&I=LXN057&P=M

So what is the smaller hex used for....is that Losi 4wd buggy front sized? Or is my imagination running wild.

top left on the tree is for a losi ( jrx2, jrxt, etc.). the bottom left on the tree is for the rc10 1/4" rear axles. bottom right is tamiya.

[terry.sc]

All the hexes are the same size. They are designed for the HPI Super Star truck wheels which have a standard 12mm hex, but those wheels have a 5mm hole in the centre which is why the hexes have the extra ring moulded into the front.

[Tadracket]

are these the same ones?
http://cgi.ebay.com/Rear-Tyre-Tamiya-Sand-Scorcher-Sand-Tires-Unlimited-SRB_W0QQitemZ250170769763QQihZ015QQcategoryZ34063QQssPageNameZWDVWQQrdZ1QQcmdZViewItem

You can get them at tower. And cheaper I do believe.

[shodog]

You can get them at tower. And cheaper I do believe.

yep, much cheaper http://www2.towerhobbies.com/cgi-bin/wti0001p?&I=LXLDX7&P=M

[mrlexan]

Doesn't Tower charge flat rate shipping regardless of size, for like $8.99 or something similar..... if that is the case, it pretty much a wash.