Traxxas Bullet Exploded View or Manual Help

[breadmac]

I have a bullet that came with two kyosho buggies and I want to restore the bullet and get rid of the ultima's, the problem is it looks like the person I got them from has mixed up the vehicle parts a little bit, so before I get rid of the kyosho's I want to make sure I keep all the correct parts. That is why I would like copies of the manual or exploded view to make sure.

[SRTracer121]

closest i can offer is the hawk manual, same difference

http://s483.photobucket.com/albums/rr198/FieroMan121/misc%20vintage%20traxxas/hawk%20manual/

[klavy69]

The hawk manual srtracer posted will get you somewhat close but not really gonna get you what you need. Best bet would be to post up some pix and we can pry help you figure out what parts aren't bullet parts. That was option A. Option B. is to head to the traxxas forums and search in the vintage traxxas electric part of the forum for pix of bullets there. There used to be a ton of bullet pix in that part of the forum. From there you might be able to figure it out also. We can try to help either way but pix would be helpful .
Todd

[dave00beer]

As Todd stated, Best bet would be to post a few pic's.

Although the parts between the Ultima and Bullet are quite different.

Here are a few pics of the Bullet that should help you easily identify the parts.






Also here is the complete parts list for the Bullet.

http://traxxas.com/sites/default/files/legacy_partslist_bullet.pdf

Hope this helps.

Dave

[purpletimbo]

some manual page scans on bottom post here
http://traxxas.com/forums/showthread.php?457821-bullet-manual

[Lonestar]

all I have is a partslist, sorry...

... and a bullet

Paul

[RedScampi]

... and a bullet

Paul

With a body?

[breadmac]

Thanks for all of your super fast respones, they have helped, the biggest issue I am having is how the rear axles are supposed to look just before you put the rear wheels on them, I want to make sure I am using the correct wheels.
Thanks.

[jwscab]

the rear hubs hold the axles without any spacers. The pin goes through the axle, and then the hex goes on top. The bullet ones were metal, about 5-6mm thick, at least the ones I had. My bullet had 3 piece satin chrome wheels that engaged the hexes. I have seen others with one piece wheels.

[mrlexan]

http://traxxas.com/support/Legacy-Models-PDF-downloads

[Lonestar]

... and a bullet

Paul

With a body?

Yes

cracked on the rear, of course


I'll have to do a family shot of my trx collection... Bullet, Rad, LSII, TRX-1, TRX-1 Black Widow, TRX-3 shelf queen, TRX-3 NiB...



Paul