The Official "What is it?" Thread

[EvolutionRevolution]

Here's one for you all.... Racing Jack alloy upgrade parts... can anybody ID these???

I think a T-bar bridge/antenna mount/ESC switch mount for a Tamiya F101/F102. The small c-shaped bit goes on the FRP rear t-bar mount, the large part and switch mount replace the front plastic t-bar mount.

[V12]

As an indication of how 'vintage' Dynamite Racing tyres are, they were standard fitment in the kit box of the PB Mini Mustang, so back to the mid to late 80s..... at least.....

Alex

The PB Mini Mustang was released 1986 and the tires were released before.
But it´s good you talked about the Mini Mustang as I always forget I also had one.

[klavy69]

i really think it's a traxxas blue eagle ls2 body. i think the grill/marker light decal kinda confirms it.

X2 on it being traxxas.

[Lonestar]

Hey Guys I've had this body for years... still no clue what it is!

Any idea?



Thanks
Paul

[slow_jun]

Just saw this, browse down MINIMINI reply regarding the C hubs.

http://www.rc10talk.com/viewtopic.php?f=29&t=16920

just solidify my statement that there was one for Optima. but not sure yours is one.

RPM stuffs are mine... hahahah....

thanks.

Bims,

i had this option part before but im not sure if its fro a Optima or a tamiya, but most likely its for a Kyosho Optima. i stand to be corrected.

8. C-hubs

those RPM knuckle arms are nice, im the first in line should you decide to sell, will this fit a 91 works?

thanks,

[Bimdapogs]

That's a different one, but yes that is for the Optima. If you notice, there's a hole in the front of the c-hub to mount the shocks.

Cheers

[Coelacanth]

That's a different one, but yes that is for the Optima. If you notice, there's a hole in the front of the c-hub to mount the shocks.

I'm looking for alloy C hubs and rear carriers for my Optimas...I tried searching for Yokomo 870z parts but found nothing. Anybody happen to have some?

[EvolutionRevolution]

Alloy hub carriers and c-hubs for the TF-2, GP Spider, and older GP-10 cars will fit the Optima fine. Companies that made such parts (to my knowledge): GPM (Hong Kong), Paranoia, Cross, Kose, Starex (all Japanese).

[klavy69]

Hey Guys I've had this body for years... still no clue what it is!

Any idea?



Thanks
Paul

Paul,
I had one very similar but not as good of shape as yours show up on a traxxas bullet I picked up several years ago that was all tricked out with aftermarket stuff. Can't find the body right now but it had stickers all over the wing from alot of aftermarket companies on it so if I can find it I'll post up some of the companys on the wing so maybe someone can id them for us.
Todd

[slow_jun]

That's a different one, but yes that is for the Optima. If you notice, there's a hole in the front of the c-hub to mount the shocks.

I'm looking for alloy C hubs and rear carriers for my Optimas...I tried searching for Yokomo 870z parts but found nothing. Anybody happen to have some?

you are barking at the right tree

[YZ-10]

Trinity aluminum wing mounts, but does anyone recall the part number?...



I'd like to try find some more. Thanks

[scr8p]

looks like hpi wing mounts....... to me.

[Charlie don't surf]

HPI for sure, but...............the knurled Trinity wing mount part # is 7079 ( I just put some on a EVO10ss about 10 mins ago )

[YZ-10]

HPI for sure, but...............the knurled Trinity wing mount part # is 7079 ( I just put some on a EVO10ss about 10 mins ago )

Ah yea I remember those ones now, but did Trinity make this version also?

I would of thought if they were HPI they'd have metric screw threads?

[Charlie don't surf]

A&L made one that looked similar, but not with that HPI blurple color ( which I actually like ). The HPI mounts were all for pan cars like the 10L and the HPI conversions- hence the SAE threads.