HI!... I have a ton of their brushless combo kits. Dam good stuff for the price. I've never had a problem with their stuff yet and I've been running it for about 3 years now.
I have an RC10T3 with Stealth tranny and wanting to install a Hobby Partz 10T, 12T or 13T Leopard ESC/Motor combo. Have any of you guys used these ESC/Motor combos? Thanks for your time.
Last post
I'm running a RC10T3 with stealth tranny stock tires. I think the 6 gear in my gold tube should hold up too. Yes, I got 29.9mph with 21/87 and 30.4mph with 21/84. I have to go easy on the throttle or else it spins out. I like it so far.
:lol: well that is the question ? i have a highly classified project thats been on the boil for a while . i need a difinative answer before it goes before the finance committee (the wife ) :lol:
regards Paul
Last post
from rcmt:
In a brushed motor the timing is mechanical, the armature coils energize on/off at a certain position of rotation and this is mechanical. This is why you can run dual brushed motors on a brushed ESC. The ESC is just controlling the...
Can you mix and match brushless ESC and motor manufacturers or do they have to be the same? I ask as I am pretty close to buying an LRP Sphere ESC and wondered if I can successfully run a sensored motor from another manufacturer with it?
Thanks.
Last post
Yeah if it's cogging on low turn motors it's the batteries, nothing can stop cogging with a 17.5 unless they figure out a way to avoid it with the software.
Sensored/sensorless makes no difference once the motor is spinning, even some sensored...
While most mentioned is name brand motors and esc’s…I have to ask if anyone has tried the cheap ebay versions? I know these without a doubt are Chinese knock offs some of the prices I’m seeing can’t be beat…
Now before I go any deeper let me be the...
Last post
Dragging an oldie up from the depths...
Would a 60a sensor ESC be sufficient for a 17.5t combo? No racing, just playing around with my kids.
I was digging through some stuff recently, kinda laughing at myself for all the crap I tend to accumulate.
- I snapped a couple pictures... (sorry for poor quality)
One of my electronics drawers - there are at least eight Novak XXL receivers in...
Last post
Awesome collection. I used to run a JR's Choice motor back in the day and I cannot even find an image of it. Would love to find a real one :D
Hey everyone, I posted a different thread here on where to buy but now that I've looked at it a little more closely, I'm feeling a bit overwhelmed with the number of choices! SO...I need to know:
1. What types of things should I be looking for in...
Last post
Interesting. I replaced the spur and pinion both with more teeth vs the stock setup on the RC10. It seemed to get a lot more top speed but had less torque, is that right? What gear ratio does the stock setup have (6 gear and stock spur and pinion)?
What type/brand of modern ESC for brushed motors can you recommend and have experience of? Forward only if possible and low resistance…
Last post
performance-wise, best is tekin fx pro and the misc variations of KO's VFS, the later versions (Hara twister, corally mms2, others)
You mean corally MMS3 :wink:
The MMS 2 still was an original Corally/Philips design, beginning with the MMS3 they...